Translate
Inspection Detail
Inspection: 1360403.015 - Faler Feed Store, Inc.
Inspection Information - Office: Columbus Area Office
Site Address:
Faler Feed Store, Inc.
4360 Cedar Hill Road
Canal Winchester, OH 43110
Mailing Address:
P.O. Box 277, Lithopolis, OH 43136
Union Status: NonUnion
SIC:
NAICS: 424510/Grain and Field Bean Merchant Wholesalers
Inspection Type: Referral
Scope: Partial
Advanced Notice: N
Ownership: Private
Safety/Health: Safety
Close Conference: 12/12/2018
Emphasis: N:Amputate
Case Closed: 04/15/2019
| Type | Activity Nr | Safety | Health |
|---|---|---|---|
| Referral | 1398741 | Yes |
| Violations/Penalties | Serious | Willful | Repeat | Other | Unclass | Total |
|---|---|---|---|---|---|---|
| Initial Violations | 5 | 5 | ||||
| Current Violations | 3 | 3 | ||||
| Initial Penalty | $16,075 | $0 | $0 | $0 | $0 | $16,075 |
| Current Penalty | $8,315 | $0 | $0 | $0 | $0 | $8,315 |
| FTA Penalty | $0 | $0 | $0 | $0 | $0 | $0 |
| # | Citation ID | Citaton Type | Standard Cited | Issuance Date | Abatement Due Date | Current Penalty | Initial Penalty | FTA Penalty | Contest | Latest Event | Note |
|---|---|---|---|---|---|---|---|---|---|---|---|
| 1. | 01001 | Serious | 19100028 B01 I | 12/17/2018 | 02/21/2019 | $2,772 | $2,772 | $0 | I - Informal Settlement | ||
| 2. | 01002A | Serious | 19100147 C07 I A | 12/17/2018 | 02/21/2019 | $3,880 | $3,880 | $0 | I - Informal Settlement | ||
| 3. | 01002B | Serious | 19100147 D04 I | 12/17/2018 | 02/21/2019 | $0 | $3,880 | $0 | I - Informal Settlement | ||
| 4. | 01002C | Serious | 19100147 F01 II | 12/17/2018 | 02/21/2019 | $0 | $0 | $0 | I - Informal Settlement | ||
| 5. | 01002D | Serious | 19100147 F03 I | 12/17/2018 | 02/21/2019 | $0 | $3,880 | $0 | I - Informal Settlement | ||
| 6. | 01005 | Serious | 19101200 H01 | 12/17/2018 | 02/21/2019 | $1,663 | $1,663 | $0 | I - Informal Settlement |
Investigation Summary
At 2:00 p.m. on November 06, 2018, Employee #1, employed by a feed store, was performing maintenance on an auger for the Kelly Duplex Feed Mixer. Employee #1 and a coworker had noticed that two bolts on top of the feed mixer were broken. Employee #1 used a ladder to access the top of the feed mixer, about 13 feet high, then exited the ladder and remained on top of the feed mixer while performing the maintenance activities. He attempted to place the new bolts into the top of the feed mixer, but the holes were not aligned. Employee #1 asked his coworker to quickly press the start and stop buttons on the mixer so that the auger would move and align the bolts. When the start and stop buttons were pressed and the auger moved, Employee #1 was pulled in by the auger, fracturing his arm, shoulder, and face. He was hospitalized. Neither Employee #1 nor his coworker were trained in lockout/tag out.
Keywords: Arm, Auger, Bolt, Face, Feed Bar, Fracture, Lockout/Tagout, Maintenance, Mixer, Shoulder
| # | Inspection | Age | Sex | Degree of Injury | Nature of Injury | Occupation |
|---|---|---|---|---|---|---|
| 1 | 1360403.015 | 58 | M | Hospitalized injury |