Powered by GoogleTranslate

Inspection Detail

Inspection: 126201649 - Whitehawk Construction Inc

Inspection Information - Office: Los Angeles District Office

 

Inspection Nr: 126201649
Report ID: 0950641
Date Opened: 10/26/2007

Site Address:
Whitehawk Construction Inc
315 W. Fifth St.
Los Angeles, CA 90014

Mailing Address:
31220 La Baya Drive #116, Westlake Village, CA 91362

Union Status: NonUnion

SIC:1741

NAICS: 238140/Masonry Contractors


Inspection Type: Accident

Scope: Complete

Advanced Notice: N

Ownership: Private

Safety/Health: Safety

Close Conference: 01/04/2008

Planning Guide: Safety-Construction

Emphasis: S:Construction (Cship)

Case Closed: 01/28/2008


Related Activity
Type Activity Nr Safety Health
Accident 101168037
Violation Summary
Violations/Penalties Serious Willful Repeat Other Unclass Total
Initial Violations 1 4 5
Current Violations 1 4 5
Initial Penalty $10,800 $0 $0 $1,060 $0 $11,860
Current Penalty $3,375 $0 $0 $560 $0 $3,935
FTA Penalty $0 $0 $0 $0 $0 $0

Violation Items
# Citation ID Citaton Type Standard Cited Issuance Date Abatement Due Date Current Penalty Initial Penalty FTA Penalty Contest Latest Event Note
1. 01001 Other 1509 A 01/08/2008 01/23/2008 $125 $375 $0 01/31/2008 W - Empr Withdrew  
2. 01002 Other 1509 C 01/08/2008 01/11/2008 $185 $185 $0 -  
3. 01003 Other 3362 F 01/08/2008 01/23/2008 $125 $375 $0 01/31/2008 W - Empr Withdrew  
4. 01004 Other 6151 E03 01/08/2008 01/23/2008 $125 $125 $0 01/31/2008 W - Empr Withdrew  
5. 02001 Serious 1520 01/08/2008 01/11/2008 $3,375 $10,800 $0 01/31/2008 W - Empr Withdrew  

Investigation Summary

Investigation Nr: 201169422
Event: 10/26/2007
Employee Injured When Glove Caught by Coring Bit

At approximately 9:28 a.m. on October 26, 2007, Employee #1 was working at a six-story building that was undergoing a seismic retrofit. Employee #1 was working with his foreman to drill a 2.5-in. hole in a 10-in. by 20-in. concrete beam. They were working on the first floor in a 4-ft by 5-ft area that was blocked off from the public by plywood barriers. The work area was tight--there was only a 27-in. clearance from the column to the wall, and rebar along the wall further reduced the working space. Employee #1, who was wearing blue cotton work gloves, was holding the 2.5-in. coring bit while the foreman was operating the drilling machine. Employee #1 said he was told to steady the coring bit because it was wobbling. As they were working, the glove on Employee #1's left hand caught a snag on the bit and pulled him into the rotating end. He sustained serious injuries to his hand and forearm, including degloving, that resulted in his hand being surgically amputated.

Keywords: ROTATING PARTS, AMPUTATED, DRILLING MACHINE, GLOVE, WORK RULES, DEGLOVED, CAUGHT BY, CONSTRUCTION, HAND

Investigated Inspection
# Inspection Age Sex Degree of Injury Nature of Injury Occupation
1 126201649 Hospitalized injury Amputation Construction laborers
Back to Top

Thank You for Visiting Our Website

You are exiting the Department of Labor's Web server.

The Department of Labor does not endorse, takes no responsibility for, and exercises no control over the linked organization or its views, or contents, nor does it vouch for the accuracy or accessibility of the information contained on the destination server. The Department of Labor also cannot authorize the use of copyrighted materials contained in linked Web sites. Users must request such authorization from the sponsor of the linked Web site. Thank you for visiting our site. Please click the button below to continue.

Close