Powered by GoogleTranslate

Inspection Detail

Inspection: 126108588 - Lpj Metalfab Inc

Inspection Information - Office: Los Angeles District Office

 

Inspection Nr: 126108588
Report ID: 0950641
Date Opened: 02/06/2003

Site Address:
Lpj Metalfab Inc
1835 W. Rosecrans Ave.
Gardena, CA 90249

Mailing Address:
, , 00000

Union Status: NonUnion

SIC:3429

NAICS: 332999/All Other Miscellaneous Fabricated Metal Product Manufacturing


Inspection Type: Accident

Scope: Partial

Advanced Notice: N

Ownership: Private

Safety/Health: Safety

Close Conference: 03/26/2003

Emphasis:

Case Closed: 09/13/2010


Related Activity
Type Activity Nr Safety Health
Accident 362576860
Violation Summary
Violations/Penalties Serious Willful Repeat Other Unclass Total
Initial Violations 3 6 9
Current Violations 2 5 7
Initial Penalty $14,400 $0 $0 $1,160 $0 $15,560
Current Penalty $3,600 $0 $0 $800 $0 $4,400
FTA Penalty $0 $0 $0 $0 $0 $0

Violation Items
# Citation ID Citaton Type Standard Cited Issuance Date Abatement Due Date Current Penalty Initial Penalty FTA Penalty Contest Latest Event Note
1. 01001 Other 14300032 A01 03/27/2003 04/29/2003 $200 $275 $0 12/16/2003 F - Formal Settlement  
2. 01002 Other 3203 B 03/27/2003 04/29/2003 $200 $275 $0 F - Formal Settlement  
3. 01003 Other 25000025 03/27/2003 04/29/2003 $100 $135 $0 F - Formal Settlement  
4. 01004 Other 4650 E 03/27/2003 04/29/2003 $0 $205 $0 F - Formal Settlement Citation has been deleted.
5. 01005 Other 3314 F 03/27/2003 04/29/2003 $100 $135 $0 F - Formal Settlement  
6. 01006 Other 3314 H 03/27/2003 04/29/2003 $0 $135 $0 F - Formal Settlement Citation has been deleted.
7. 02001 Serious 3203 A 03/27/2003 04/14/2003 $1,800 $7,200 $0 12/16/2003 F - Formal Settlement  
8. 03001 Other 4650 F 03/27/2003 04/14/2003 $200 $3,600 $0 12/16/2003 F - Formal Settlement  
9. 04001 Serious 4227 D 03/27/2003 04/14/2003 $1,800 $3,600 $0 12/16/2003 F - Formal Settlement  

Investigation Summary

Investigation Nr: 201164274
Event: 01/27/2003
Employee hands crushed while operation a hydraulic shear

At approximately 4:15 p.m. January 27, 2003, Employee #1, a material attendant, was engaged in the process of, cutting a 8 ft by 6 in titanium metal piece into a 3-in. wide strip using a hydraulic shear. As Employee #1 was about to cut the stock he activated the shear with the foot control, and his right index finger was caught and pinched at one of the hold-down clamps. Employee #1 suffered the loss of a piece of right index fingernail and fingertip. The company is a full-service metal fabrication facility including -- Titanium Hot-Forming and Sizing, Hydra-Forming, Stretch-Forming, Assembly and Welding. LPJ occupies a thoroughly modern, 20,000-square-foot building with thirty-five employees. LPJ is a preferred supplier to major aerospace contractors. The accident happened at the fabrication area of the warehouse, located northwest corner of the building. The equipment involved in the accident was a yellow Diacro Hydraulic Shear - 200 Ton by 12 ft by .25 in., Serial Number 121468507 with a 3-phase motor and control. Upon interviewing, Employee #1 it was found that the guarding on the shear to protect the operator from the point of operations was removed and not used during operation. Employee #1 needed to hold the piece down with a hand for a precision cut as the bracket to hold the stopper on one end was not working properly. This was not a reportable accident. No accident related violation was issued due to the extent of injury incurred.

Keywords: FINGER, GUARD, CRUSHED, HYDRAULIC TOOL, METAL STRIP

Investigated Inspection
# Inspection Age Sex Degree of Injury Nature of Injury Occupation
1 126108588 Non Hospitalized injury Cut/Laceration Stock and inventory clerks
Back to Top

Thank You for Visiting Our Website

You are exiting the Department of Labor's Web server.

The Department of Labor does not endorse, takes no responsibility for, and exercises no control over the linked organization or its views, or contents, nor does it vouch for the accuracy or accessibility of the information contained on the destination server. The Department of Labor also cannot authorize the use of copyrighted materials contained in linked Web sites. Users must request such authorization from the sponsor of the linked Web site. Thank you for visiting our site. Please click the button below to continue.

Close