Powered by GoogleTranslate

Inspection Detail

Inspection: 126022052 - Rocketdyne Propulsion & Power

Inspection Information - Office: Van Nuys District Office

 

Inspection Nr: 126022052
Report ID: 0950643
Date Opened: 05/10/1999

Site Address:
Rocketdyne Propulsion & Power
8900 De Soto Ave.
Canoga Park, CA 91304

Mailing Address:
6633 Canoga Ave., Canoga Park, CA 91309

Union Status: Union

SIC:3764

NAICS: 0 


Inspection Type: Accident

Scope: Partial

Advanced Notice: N

Ownership: Private

Safety/Health: Safety

Close Conference: 10/20/1999

Emphasis:

Case Closed: 10/31/2000


Related Activity
Type Activity Nr Safety Health
Accident 362500746
Violation Summary
Violations/Penalties Serious Willful Repeat Other Unclass Total
Initial Violations 4 4
Current Violations 1 1
Initial Penalty $0 $0 $0 $750 $0 $750
Current Penalty $0 $0 $0 $225 $0 $225
FTA Penalty $0 $0 $0 $0 $0 $0

Violation Items
# Citation ID Citaton Type Standard Cited Issuance Date Abatement Due Date Current Penalty Initial Penalty FTA Penalty Contest Latest Event Note
1. 01001 Other 3400 C 10/22/1999 11/24/1999 $150 $150 $0 12/29/1999 J - ALJ Decision Citation has been deleted.
2. 01002 Other 3328 C 10/22/1999 11/04/1999 $225 $225 $0 12/29/1999 J - ALJ Decision Citation has been deleted.
3. 01003 Other 3384 B 10/22/1999 11/04/1999 $225 $225 $0 -  
4. 01004 Other 4296 J 10/22/1999 11/04/1999 $150 $150 $0 12/29/1999 J - ALJ Decision Citation has been deleted.

Investigation Summary

Investigation Nr: 201112331
Event: 04/23/1999
Employee injured when fingers amputated by saw

On April 23, 1999, Employee #1 was operating a Rockwell RT-40 Table Saw located in the Box Shop of Building 106. He was in the process of cutting 6-in. strips from various sized pieces of plywood. According to Employee #1, the blade was set at a height of approximately 3.25 in. above the table. The guard was in place and he was wearing gloves. Before the accident occurred, he had cut about 40 pieces and indicated that during the times when he was cutting 1-in. strips, the pieces were falling into the "gap" on the left side of the blade insert plate. He stated that he used the "push stick" to remove the pieces out of the opening in the plate insert. According to Employee #1, when the accident occurred he was in the process of using the push stick to remove a 1-in. strip of wood out of the gap on the left side of the blade in the insert plate when the guard flipped up and his right gloved hand made contact with the running saw blade. Employee #1 suffered deep lacerations to his index finger and the amputation of the first joints on his right middle and ring fingers. Employee #1 was taken to the hospital.

Keywords: AMPUTATED, FINGER, SAW, LACERATION, HAND, TABLE SAW

Investigated Inspection
# Inspection Age Sex Degree of Injury Nature of Injury Occupation
1 126022052 Non Hospitalized injury Amputation Sawing machine operators
Back to Top

Thank You for Visiting Our Website

You are exiting the Department of Labor's Web server.

The Department of Labor does not endorse, takes no responsibility for, and exercises no control over the linked organization or its views, or contents, nor does it vouch for the accuracy or accessibility of the information contained on the destination server. The Department of Labor also cannot authorize the use of copyrighted materials contained in linked Web sites. Users must request such authorization from the sponsor of the linked Web site. Thank you for visiting our site. Please click the button below to continue.

Close