Translate
Inspection Detail
Inspection: 125949651 - Southern California Plastics
Inspection Information - Office: Santa Ana District Office
Site Address:
Southern California Plastics
3122 S Maple St
Santa Ana, CA 92705
Mailing Address:
3122 S Maple Street, Santa Ana, CA 92705
Union Status: NonUnion
SIC:3089
NAICS: 326199/All Other Plastics Product Manufacturing
Inspection Type: Accident
Scope: Partial
Advanced Notice: N
Ownership: Private
Safety/Health: Safety
Close Conference: 06/23/2006
Planning Guide: Safety-Manufacturing
Emphasis:
Case Closed: 08/24/2009
| Type | Activity Nr | Safety | Health |
|---|---|---|---|
| Accident | 101149185 |
| Violations/Penalties | Serious | Willful | Repeat | Other | Unclass | Total |
|---|---|---|---|---|---|---|
| Initial Violations | 1 | 2 | 3 | |||
| Current Violations | 1 | 2 | 3 | |||
| Initial Penalty | $18,000 | $0 | $0 | $750 | $0 | $18,750 |
| Current Penalty | $1,025 | $0 | $0 | $375 | $0 | $1,400 |
| FTA Penalty | $0 | $0 | $0 | $0 | $0 | $0 |
| # | Citation ID | Citaton Type | Standard Cited | Issuance Date | Abatement Due Date | Current Penalty | Initial Penalty | FTA Penalty | Contest | Latest Event | Note |
|---|---|---|---|---|---|---|---|---|---|---|---|
| 1. | 01001 | Other | 3203 B01 | 07/27/2006 | 08/03/2006 | $375 | $375 | $0 | 08/31/2006 | F - Formal Settlement | |
| 2. | 01002 | Other | 3203 B02 | 07/27/2006 | 08/03/2006 | $0 | $375 | $0 | 08/31/2006 | F - Formal Settlement | |
| 3. | 02001 | Serious | 4184 B | 07/27/2006 | 08/03/2006 | $1,025 | $18,000 | $0 | F - Formal Settlement |
Investigation Summary
On March 15, 2006, a temporary employee was working in the assembly department of Southern California Plastics. The company was an injection-molding manufacturer of plastic specialty tools and other products. The employee was directed by her immediate supervisor to operate a Rother Machine Tools pneumatic press, Serial Number 12VSG/A1974. The machine was used to crimp rivets, about 0.5 inch in diameter, to each end of a length of twisted wire rope about 12 in. long. Once there was a rivet sitting loosely on each end of the rope, they were placed in the pneumatic press, held in place by the operator, and crimped. A foot pedal activated the stamping action. The machine did not have a guard to keep the operator's fingers out of the point of operation. Upon placing the third or fourth assemblage into the point of operation for crimping, the employee activated the ram with the foot pedal. The ram came down on the employee's left long finger, which was still in the point of operation. The ram crushed the end of her finger, just above the first joint. She pulled her finger out, tearing off skin and flesh. She yelled for help, and coworkers came to her aid. She was taken to the company's walk-in clinic for medical treatment. The employee lost the tip of her left middle finger.
Keywords: AMPUTATED, POWER PRESS, FINGER, MOLDING MACHINE, WORK RULES, FOOT CONTROL, POINT OF OPERATION, PLASTIC MFG, FOOT-POWERED PRESS, UNGUARDED
| # | Inspection | Age | Sex | Degree of Injury | Nature of Injury | Occupation |
|---|---|---|---|---|---|---|
| 1 | 125949651 | Hospitalized injury | Amputation | Assemblers |