Translate
Inspection Detail
Inspection: 125943381 - Ellison Technologies, Inc
Inspection Information - Office: San Bernardino District Office
Site Address:
Ellison Technologies, Inc
1720 S Bonview Ave
Ontario, CA 91761
Mailing Address:
9912 S Pioneer Blvd, Santa Fe Springs, CA 90670
Union Status: NonUnion
SIC:3599
NAICS: 332710/Machine Shops
Inspection Type: Accident
Scope: Partial
Advanced Notice: N
Ownership: Private
Safety/Health: Safety
Close Conference: 05/09/2007
Emphasis:
Case Closed: 03/23/2010
| Type | Activity Nr | Safety | Health |
|---|---|---|---|
| Accident | 102493061 |
| Violations/Penalties | Serious | Willful | Repeat | Other | Unclass | Total |
|---|---|---|---|---|---|---|
| Initial Violations | 4 | 4 | ||||
| Current Violations | 4 | 4 | ||||
| Initial Penalty | $0 | $0 | $0 | $6,875 | $0 | $6,875 |
| Current Penalty | $0 | $0 | $0 | $1,600 | $0 | $1,600 |
| FTA Penalty | $0 | $0 | $0 | $0 | $0 | $0 |
| # | Citation ID | Citaton Type | Standard Cited | Issuance Date | Abatement Due Date | Current Penalty | Initial Penalty | FTA Penalty | Contest | Latest Event | Note |
|---|---|---|---|---|---|---|---|---|---|---|---|
| 1. | 01001 | Other | 342 A | 05/09/2007 | 06/11/2007 | $1,300 | $5,000 | $0 | 07/05/2007 | F - Formal Settlement | |
| 2. | 01002 | Other | 3203 B02 | 05/09/2007 | 06/11/2007 | $0 | $375 | $0 | 07/05/2007 | F - Formal Settlement | |
| 3. | 01003 | Other | 3203 A04 B | 05/09/2007 | 06/11/2007 | $0 | $750 | $0 | 07/05/2007 | F - Formal Settlement | |
| 4. | 01004 | Other | 4999 G | 05/09/2007 | 06/11/2007 | $300 | $750 | $0 | 07/05/2007 | F - Formal Settlement |
Investigation Summary
At 2:30 p.m. on November 28, 2006, Employee #1 was tightening the bolts of the column base of a Boring Mill while an engineer was manually cycling the tool-changer assembly, standing freely in the upright position on the concrete floor approximately 8 feet away from the column. As the tool-changer arm cycled and swung around, the entire assembly toppled towards the column and pinned Employee #1 against the column causing serious injuries. The tool-changer assembly was freely standing for four days and was detached from overhead crane without verifying that the assembly had been secured or supported to prevent inadvertent movement. Employee #1 worked for a week for this employer as a maintenance assistant.
Keywords: PINNED, BORING MACHINE
| # | Inspection | Age | Sex | Degree of Injury | Nature of Injury | Occupation |
|---|---|---|---|---|---|---|
| 1 | 125943381 | Hospitalized injury | Fracture | Machinery maintenance occupations |