Translate
Inspection Detail
Inspection: 125881342 - Selinstafab Inc
Inspection Information - Office: San Bernardino District Office
Site Address:
Selinstafab Inc
14470 S Euclid Ave
Chino, CA 91710
Mailing Address:
, , 00000
Union Status: NonUnion
SIC:3523
NAICS: 333111/Farm Machinery and Equipment Manufacturing
Inspection Type: Accident
Scope: Partial
Advanced Notice: N
Ownership: Private
Safety/Health: Safety
Close Conference: 08/14/2006
Emphasis:
Case Closed: 03/22/2010
| Type | Activity Nr | Safety | Health |
|---|---|---|---|
| Accident | 102487626 |
| Violations/Penalties | Serious | Willful | Repeat | Other | Unclass | Total |
|---|---|---|---|---|---|---|
| Initial Violations | 5 | 1 | 6 | |||
| Current Violations | 4 | 2 | 6 | |||
| Initial Penalty | $37,800 | $0 | $0 | $550 | $0 | $38,350 |
| Current Penalty | $12,600 | $0 | $0 | $950 | $0 | $13,550 |
| FTA Penalty | $0 | $0 | $0 | $0 | $0 | $0 |
| # | Citation ID | Citaton Type | Standard Cited | Issuance Date | Abatement Due Date | Current Penalty | Initial Penalty | FTA Penalty | Contest | Latest Event | Note |
|---|---|---|---|---|---|---|---|---|---|---|---|
| 1. | 01001 | Other | 3203 A | 08/14/2006 | 09/07/2006 | $550 | $550 | $0 | 09/11/2006 | F - Formal Settlement | |
| 2. | 02001 | Serious | 4227 B | 08/14/2006 | 08/28/2006 | $1,800 | $4,950 | $0 | 09/11/2006 | F - Formal Settlement | |
| 3. | 03001 | Serious | 4227 E | 08/14/2006 | 08/28/2006 | $3,600 | $4,950 | $0 | 09/11/2006 | F - Formal Settlement | |
| 4. | 04001 | Other | 4230 B | 08/14/2006 | 08/28/2006 | $400 | $4,950 | $0 | 09/11/2006 | F - Formal Settlement | |
| 5. | 05001 | Serious | 4185 | 08/14/2006 | 08/28/2006 | $3,600 | $4,950 | $0 | 09/11/2006 | F - Formal Settlement | |
| 6. | 06001 | Serious | 4186 B | 08/14/2006 | 08/28/2006 | $3,600 | $18,000 | $0 | 09/11/2006 | F - Formal Settlement |
Investigation Summary
At approximately 3:17 p.m. on April 7, 2006, Employee #1 was cutting sheet metal at Selinstafab Incorporated. He was using a 10-ft mechanical squaring metal shear (Cincinnati 1410, Serial Number 18683, 0.1875 in. mild steel capacity). The shear is activated by a foot operated bar, which was not protected from unintended operation. The shear's knife is guarded by a point of operation guard in the form of a comb-like barrier. Only nine of the shear's eleven hold-downs were guarded. There was a clearance of not more than 0.375 in. between the table and the bottom of the guard. Employee #1 and Employee #2 were cutting a piece sheet metal approximately 4 ft by 6 in. by 0.1875 in. thick. Employee #1 was injured, when his hand was pulled into the shear, when Employee #2 pulled on the sheet metal piece that Employee #1 was holding. He was treated at U.S. Healthworks in Chino Hills. He was then transferred to Citrus Valley Medical Center for partial amputation to two fingers on his left hand.
Keywords: AMPUTATED, SHEAR, SHEET METAL, FINGER, MACHINE OPERATOR, POINT OF OPERATION, UNGUARDED
| # | Inspection | Age | Sex | Degree of Injury | Nature of Injury | Occupation |
|---|---|---|---|---|---|---|
| 1 | 125881342 | Non Hospitalized injury | Amputation | Slicing and cutting machine operators |