Translate
Inspection Detail
Inspection: 125474197 - Agwood Mill & Lumber Inc.
Inspection Information - Office: American Canyon District Office
Site Address:
Agwood Mill & Lumber Inc.
650 Kunzler Ranch Road
Ukiah, CA 95482
Mailing Address:
Po Box 1443, Ukiah, CA 95482
Union Status: NonUnion
SIC:2421
NAICS: 321113/Sawmills
Inspection Type: Accident
Scope: Partial
Advanced Notice: N
Ownership: Private
Safety/Health: Safety
Close Conference: 12/21/2007
Planning Guide: Safety-Manufacturing
Emphasis:
Case Closed: 03/01/2013
| Type | Activity Nr | Safety | Health |
|---|---|---|---|
| Accident | 101024818 |
| Violations/Penalties | Serious | Willful | Repeat | Other | Unclass | Total |
|---|---|---|---|---|---|---|
| Initial Violations | 1 | 1 | 2 | |||
| Current Violations | 1 | 1 | 2 | |||
| Initial Penalty | $14,400 | $0 | $0 | $5,000 | $0 | $19,400 |
| Current Penalty | $7,000 | $0 | $0 | $5,000 | $0 | $12,000 |
| FTA Penalty | $0 | $0 | $0 | $0 | $0 | $0 |
| # | Citation ID | Citaton Type | Standard Cited | Issuance Date | Abatement Due Date | Current Penalty | Initial Penalty | FTA Penalty | Contest | Latest Event | Note |
|---|---|---|---|---|---|---|---|---|---|---|---|
| 1. | 01001 | Other | 342 A | 12/21/2007 | 12/27/2007 | $5,000 | $5,000 | $0 | 03/12/2008 | J - ALJ Decision | |
| 2. | 02001 | Serious | 6365 D | 12/21/2007 | 12/27/2007 | $7,000 | $14,400 | $0 | 03/12/2008 | Y - State Decision |
Investigation Summary
At approximately 7:00 am, August 7, 2007, Employee #1 of Agwood Mill & Lumber Inc., was seriously injured at the lumber sawmill when he stepped into a 19 in. deep unprotected floor trough. Employee #1 suffered a fracture to his right leg near the ankle when he stepped into the open trough while in route to assist Employee #2 clearing a jam at the strain motor on a saw.
Keywords: CHAIN, FRACTURE, SAW, CONVEYOR, SAWMILL, ANKLE, LEG
| # | Inspection | Age | Sex | Degree of Injury | Nature of Injury | Occupation |
|---|---|---|---|---|---|---|
| 1 | 125474197 | Hospitalized injury | Fracture | Precision grinders, fitters and tool sharpeners |