Powered by GoogleTranslate

Inspection Detail

Inspection: 124750845 - John David Reed & Joyce Marie Reed

Inspection Information - Office: Eugene

 

Inspection Nr: 124750845
Report ID: 1054114
Date Opened: 05/12/1994

Site Address:
John David Reed & Joyce Marie Reed
3251 Old Salem Hwy
Albany, OR 97321

Mailing Address:
Po Box 5, Scio, OR 97374

Union Status: NonUnion

SIC:1721

NAICS: 0 

Inspection Type: Accident

Scope: Complete

Advanced Notice: N

Ownership: Private

Safety/Health: Safety

Close Conference: 05/12/1994

Planning Guide: Safety-Construction

Emphasis:

Case Closed: 08/25/1994

Violation Summary
Violations/Penalties Serious Willful Repeat Other Unclass Total
Initial Violations 1 2 3
Current Violations 1 2 3
Initial Penalty $200 $0 $0 $60 $0 $260
Current Penalty $200 $0 $0 $60 $0 $260
FTA Penalty $0 $0 $0 $0 $0 $0

Violation Items
# Citation ID Citaton Type Standard Cited Issuance Date Abatement Due Date Current Penalty Initial Penalty FTA Penalty Contest Latest Event Note
1. 01001 Serious 19260021 B02 07/20/1994 06/21/1994 $200 $200 $0 -  
2. 02002 Other 19260059 H02 IV 07/20/1994 07/23/1994 $60 $60 $0 -  
3. 02003 Other 19260059 E01 07/20/1994 08/03/1994 $0 $0 $0 -  

Investigation Summary

Investigation Nr: 170133706
Event: 05/12/1994
Employee hospitalized when tied off to activated drive shaft

Employee #1, of Reed's Painting, which was contracted to paint a paper machine during a shut-down, was painting piping that was 15 to 16 ft high and located in a cramped location. The employees were using a stepladder, a scaffold plank, and a building beam to access the pipes, and wore full body harnesses with lanyards for fall protection. A 12 ft long, 5 in. diameter drive shaft to the cantilever beam of the paper machine was located near the work site. Because of its construction and location (couplers or joints not readily visible and running parallel to other piping) Employee #1 mistook the drive shaft for piping and attached his lanyard to it. When paper company workers on the other side of the machine activated the cantilever system to open the machine, Employee #1's lanyard wound around the shaft. The 30 rpm shaft wound him tight against the anchor ring on the back of his body harness and then carried him one revolution around the shaft. He went between two 18 to 19 in. openings between other fixed surfaces. Employee #1 was freed by a coworker who began to cut his cinched body harness before the shaft stopped turning. He was hospitalized.

Keywords: LANYARD, ENTANGLED, PAINTER, TIE-OFF, DRIVE SHAFT, INATTENTION, CONSTRUCTION

Investigated Inspection
# Inspection Age Sex Degree of Injury Nature of Injury Occupation
1 124750845 Hospitalized injury Bruise/Contus/Abras Painters, construction and maintenance
Back to Top

Thank You for Visiting Our Website

You are exiting the Department of Labor's Web server.

The Department of Labor does not endorse, takes no responsibility for, and exercises no control over the linked organization or its views, or contents, nor does it vouch for the accuracy or accessibility of the information contained on the destination server. The Department of Labor also cannot authorize the use of copyrighted materials contained in linked Web sites. Users must request such authorization from the sponsor of the linked Web site. Thank you for visiting our site. Please click the button below to continue.

Close