Inspection Detail
Inspection: 124595737 - Acramold, Inc.
Inspection Information - Office: Ky Labor Cabinet Division Of Osh Compliance
Site Address:
Acramold, Inc.
1670 Distribution Dr
Burlington, KY 41005
Mailing Address:
, , 00000
Union Status: NonUnion
SIC:3089
NAICS: 0
Inspection Type: Accident
Scope: Complete
Advanced Notice: N
Ownership: Private
Safety/Health: Safety
Close Conference: 04/22/1994
Planning Guide: Safety-Manufacturing
Emphasis:
Case Closed: 12/12/1996
| Type | Activity Nr | Safety | Health |
|---|---|---|---|
| Accident | 361314800 |
| Violations/Penalties | Serious | Willful | Repeat | Other | Unclass | Total |
|---|---|---|---|---|---|---|
| Initial Violations | 4 | 4 | ||||
| Current Violations | 4 | 4 | ||||
| Initial Penalty | $3,550 | $0 | $0 | $0 | $0 | $3,550 |
| Current Penalty | $1,500 | $0 | $0 | $0 | $0 | $1,500 |
| FTA Penalty | $0 | $0 | $0 | $0 | $0 | $0 |
| # | Citation ID | Citaton Type | Standard Cited | Issuance Date | Abatement Due Date | Current Penalty | Initial Penalty | FTA Penalty | Contest | Latest Event | Note |
|---|---|---|---|---|---|---|---|---|---|---|---|
| 1. | 01001 | Serious | 19100147 C04 I | 05/06/1994 | 06/02/1994 | $388 | $900 | $0 | 05/27/1994 | R - Review Commission | |
| 2. | 01002 | Serious | 19100212 A03 II | 05/06/1994 | 06/02/1994 | $388 | $900 | $0 | 05/27/1994 | R - Review Commission | |
| 3. | 01003 | Serious | 19100219 C02 I | 05/06/1994 | 06/02/1994 | $113 | $625 | $0 | 05/27/1994 | R - Review Commission | |
| 4. | 01004A | Serious | 19101030 C01 I | 05/06/1994 | 06/16/1994 | $613 | $1,125 | $0 | 05/27/1994 | R - Review Commission | |
| 5. | 01004B | Serious | 19101030 G02 I | 05/06/1994 | 06/16/1994 | $0 | $0 | $0 | 05/27/1994 | - |
Investigation Summary
At approximately 1:15 p.m. on March 29, 1994, Employee #1 was removing a plastic part from the mold of a Negri Bossi & Co. injection molding machine. The piston in the hydraulic pump became detached from its rod, allowing the hydraulic oil to act against the rod. This action forced the mold to close on Employee #1's hand.
Keywords: MOLDING MACHINE, PISTON, LOCKOUT, CAUGHT BETWEEN, POINT OF OPERATION, HAND, HYDRAULIC PUMP
| # | Inspection | Age | Sex | Degree of Injury | Nature of Injury | Occupation |
|---|---|---|---|---|---|---|
| 1 | 124595737 | Hospitalized injury | Fracture | Molding and casting machine operators |
Translate