Translate
Inspection Detail
Inspection: 120260302 - Martin Engineering, Inc.
Inspection Information - Office: Monrovia District Office
Site Address:
Martin Engineering, Inc.
5454 Second St.
Irwindale, CA 91706
Mailing Address:
, , 00000
Union Status: NonUnion
SIC:3599
NAICS: 0
Inspection Type: Accident
Scope: Complete
Advanced Notice: N
Ownership: Private
Safety/Health: Safety
Close Conference: 09/07/1999
Emphasis:
Case Closed: 08/24/2000
| Type | Activity Nr | Safety | Health |
|---|---|---|---|
| Accident | 362624348 |
| Violations/Penalties | Serious | Willful | Repeat | Other | Unclass | Total |
|---|---|---|---|---|---|---|
| Initial Violations | 3 | 5 | 8 | |||
| Current Violations | 1 | 7 | 8 | |||
| Initial Penalty | $2,520 | $0 | $0 | $945 | $0 | $3,465 |
| Current Penalty | $560 | $0 | $0 | $600 | $0 | $1,160 |
| FTA Penalty | $0 | $0 | $0 | $0 | $0 | $0 |
| # | Citation ID | Citation Type | Standard Cited | Issuance Date | Abatement Due Date | Current Penalty | Initial Penalty | FTA Penalty | Contest | Latest Event | Note |
|---|---|---|---|---|---|---|---|---|---|---|---|
| 1. | 01001 | Other | 461 C | 09/07/1999 | 10/07/1999 | $150 | $225 | $0 | 09/29/1999 | F - Formal Settlement | |
| 2. | 01002 | Other | 342 A | 09/07/1999 | 10/07/1999 | $150 | $225 | $0 | 09/29/1999 | F - Formal Settlement | |
| 3. | 01003 | Other | 4002 A | 09/07/1999 | 10/07/1999 | $0 | $165 | $0 | 09/29/1999 | F - Formal Settlement | |
| 4. | 01004 | Other | 3203 A | 09/07/1999 | 10/08/1999 | $0 | $165 | $0 | 09/29/1999 | F - Formal Settlement | |
| 5. | 01005 | Other | 23400023 | 09/07/1999 | 10/07/1999 | $75 | $165 | $0 | 09/29/1999 | F - Formal Settlement | |
| 6. | 02001 | Serious | 4214 A | 09/07/1999 | 10/07/1999 | $560 | $840 | $0 | 09/29/1999 | F - Formal Settlement | |
| 7. | 03001 | Other | 4650 D | 09/07/1999 | 10/07/1999 | $0 | $840 | $0 | 09/29/1999 | F - Formal Settlement | |
| 8. | 04001 | Other | 4845 B | 09/07/1999 | 10/07/1999 | $225 | $840 | $0 | 09/29/1999 | F - Formal Settlement |
Investigation Summary
At approximately 8:45 a.m. on July 16, 1999, Employee #1, a machine operator, was operating a Victor lathe. He was using a drill bit in the tail stock to ream out the end of a 98-in.-long piece or 0.785-in. outside diameter stainless-steel tubing. The tubing had a wall thickness of 0.125 in. and extended beyond the front end of the pipe lathe approximately 4 ft. The piece that extended beyond the front end of the lathe was supported only by the lathe chuck. Employee #1 finished reaming one end of the tubing and removed the tubing from the lathe. He turned it 180 degrees and was preparing to ream the second end when the tubing bent 90 degrees causing it to strike the cement floor. It completed its rotation and the tubing struck the back of Employee #1's head, neck and left arm. He was hospitalized.
Keywords: FRACTURE, HEAD, LATHE, ROTATING PARTS, NECK, STRUCK BY, ARM
| # | Inspection | Age | Sex | Degree of Injury | Nature of Injury | Occupation |
|---|---|---|---|---|---|---|
| 1 | 120260302 | Hospitalized injury | Concussion | Lathe and turning machine operators |