Translate
Inspection Detail
Inspection: 120082854 - Automation Plating Corporation
Inspection Information - Office: Long Beach District Office
Site Address:
Automation Plating Corporation
927 Thompson Ave
Glendale, CA 91201
Mailing Address:
, , 00000
Union Status: NonUnion
SIC:3471
NAICS: 332813/ Electroplating, Plating, Polishing, Anodizing, and Coloring
Inspection Type: Accident
Scope: Partial
Advanced Notice: N
Ownership: Private
Safety/Health: Safety
Close Conference: 09/19/2005
Planning Guide: Safety-Manufacturing
Emphasis:
Case Closed: 06/21/2006
| Type | Activity Nr | Safety | Health |
|---|---|---|---|
| Accident | 101057156 |
| Violations/Penalties | Serious | Willful | Repeat | Other | Unclass | Total |
|---|---|---|---|---|---|---|
| Initial Violations | 2 | 2 | ||||
| Current Violations | 2 | 2 | ||||
| Initial Penalty | $0 | $0 | $0 | $5,810 | $0 | $5,810 |
| Current Penalty | $0 | $0 | $0 | $5,810 | $0 | $5,810 |
| FTA Penalty | $0 | $0 | $0 | $0 | $0 | $0 |
| # | Citation ID | Citaton Type | Standard Cited | Issuance Date | Abatement Due Date | Current Penalty | Initial Penalty | FTA Penalty | Contest | Latest Event | Note |
|---|---|---|---|---|---|---|---|---|---|---|---|
| 1. | 01001 | Other | 342 A | 09/16/2005 | 10/04/2005 | $5,000 | $5,000 | $0 | - | ||
| 2. | 01002 | Other | 3203 A07 | 09/16/2005 | 10/04/2005 | $810 | $810 | $0 | - |
Investigation Summary
On May 3, 2005, an employee, a plating machine operator, was unloading the racks with plated parts from the automated Plating Machine Number 6. He was placing them on the cable located behind him to dry out the parts. The employee reached with his left hand to grab a rack from the plating machine while the carriage was ascending from the plating tank. There was some resistance on the rail and the employee lost balance. He tried to regain his balance by grabbing the orange frame of the plating carriage with his right hand, which was about a half way up. As he held on to the frame, the carriage continued its upward travel at 27 ft per minute and his right hand was caught between the frame of the carriage and the metal bar of the indexing system. The employee told a witness, who was loading the rack with parts to be plated on the other side of the platform, to turn off the plating machine and lower the carriage to release his hand. The employee was transported to St. Joseph Hospital, where he was hospitalized for 5 days. He was diagnosed with partially torn tendon on his right hand.
Keywords: TENDON, MACHINE OPERATOR, CAUGHT BETWEEN, CRUSHED, HAND
| # | Inspection | Age | Sex | Degree of Injury | Nature of Injury | Occupation |
|---|---|---|---|---|---|---|
| 1 | 120082854 | Hospitalized injury | Other | Metal plating machine operators |