Inspection Detail
Inspection: 120071196 - J. Miller Co. Inc.
Inspection Information - Office: Van Nuys District Office
Site Address:
J. Miller Co. Inc.
7542 San Fernando Rd.
Sun Valley, CA 91352
Mailing Address:
, , 00000
Union Status: NonUnion
SIC:3554
NAICS: 0
Inspection Type: Accident
Scope: Partial
Advanced Notice: N
Ownership: Private
Safety/Health: Safety
Close Conference: 10/27/1994
Planning Guide: Safety-Manufacturing
Emphasis:
Case Closed: 02/21/1995
Type | Activity Nr | Safety | Health |
---|---|---|---|
Accident | 362297079 |
Violations/Penalties | Serious | Willful | Repeat | Other | Unclass | Total |
---|---|---|---|---|---|---|
Initial Violations | 1 | 2 | 3 | |||
Current Violations | 2 | 2 | ||||
Initial Penalty | $3,500 | $0 | $0 | $450 | $0 | $3,950 |
Current Penalty | $0 | $0 | $0 | $450 | $0 | $450 |
FTA Penalty | $0 | $0 | $0 | $0 | $0 | $0 |
# | Citation ID | Citaton Type | Standard Cited | Issuance Date | Abatement Due Date | Current Penalty | Initial Penalty | FTA Penalty | Contest | Latest Event | Note |
---|---|---|---|---|---|---|---|---|---|---|---|
1. | 01001 | Other | 3314 G | 11/14/1994 | 11/16/1994 | $150 | $150 | $0 | - | ||
2. | 01002 | Other | 3314 A | 11/30/1994 | 10/25/1994 | $300 | $300 | $0 | - | ||
3. | 02001 | Serious | 3314 A | 11/14/1994 | 11/16/1994 | $0 | $3,500 | $0 | A - Amendment | Citation has been deleted. |
Investigation Summary
Employee #1 had shut down a gasket cutting press in order to re-align the die. The machine had two-hand controls and she assumed that it was safe to put her hand into the press to adjust the die. A fellow employee noticed that the press was down and, not seeing Employee #1, pushed the hand controls. Employee #1's right hand was amputated above the wrist.
Keywords: DIE, MAINTENANCE, AMPUTATED, WORK RULES, LOCKOUT, TWO-HAND CONTROL, POINT OF OPERATION, HAND, PRESS, INATTENTION
# | Inspection | Age | Sex | Degree of Injury | Nature of Injury | Occupation |
---|---|---|---|---|---|---|
1 | 120071196 | Hospitalized injury | Amputation | Punching and stamping press machine operators |