Inspection Detail

Inspection: 111640629 - Interstate, Inc.

Inspection Information - Office: Minnesota Department Of Labor And Industry

Inspection Nr: 111640629

Report ID: 0552700

Date Opened: 08/04/1992

Site Address:
Interstate, Inc.
I94 & Cord 1
Fergus Falls, MN 56537

Mailing Address:
Box 636, Fergus Falls, MN 56537

Union Status: NonUnion

SIC:7699

NAICS: 0

Inspection Type: Accident

Scope: Partial

Advanced Notice: N

Ownership: Private

Safety/Health: Safety

Close Conference: 08/05/1992

Emphasis:

Case Closed: 07/27/1993

Related Activity
Type	Activity Nr	Safety	Health
Accident	360241178

Violation Summary
Violations/Penalties	Serious	Willful	Repeat	Other	Unclass	Total
Initial Violations	3					3
Current Violations	3					3
Initial Penalty	$5,415	$0	$0	$0	$0	$5,415
Current Penalty	$2,978	$0	$0	$0	$0	$2,978
FTA Penalty	$0	$0	$0	$0	$0	$0

Violation Items
#	Citation ID	Citaton Type	Standard Cited	Issuance Date	Abatement Due Date	Current Penalty	Initial Penalty	FTA Penalty	Contest	Latest Event
1.	01001	Serious	19100252 A03 II	09/10/1992	02/22/1994	$2,438	$4,875	$0	09/30/1992	F - Formal Settlement
2.	01002	Serious	19100254 D01	09/10/1992	02/22/1994	$270	$270	$0	09/30/1992	F - Formal Settlement
3.	01003	Serious	5206070001	09/10/1992	11/16/1992	$270	$270	$0		-

Investigation Summary

Investigation Nr: 813956

Event: 07/31/1992

EMPLOYEE KILLED BY EXPLOSION DURING WELDING

AT ABOUT 4 P.M. ON JULY 31, 1992, EMPLOYEE #1, A WELDER, WAS INSTALLING A NEW CENTER SHAFT SUPPORT WELDMENT INTO THE END OF A DRUM-TYPE ROLLER USED IN A MODEL 596 OWATTANA HAY BALER. THE ROLLER'S OLD WELDMENT HAD BEEN REMOVED WITH A CUTTING TORCH AND THE ROLLER HAD BEEN PREPARED FOR THE NEW PART BY GRINDING. AT SOME POINT, EMPLOYEE #1 USED A SPRAY GREASE FROM A PRESSURIZED CAN TO COAT THE INSIDE OF THE ROLLER WHERE THE WELDMENT HAD TO SLIP IN. THE PRODUCT CONTAINED 46 PERCENT CHLORINATED SOLVENTS AND PETROLEUM DISTILLATES, GREASE, AND PROPANE/ISOBUTANE/N-BUTANE PROPELLENT. A COWORKER ASSISTED EMPLOYEE #1 IN THE INSERTION OF THE WELDMENT INTO THE END OF THE ROLLER AND THEN LEFT THE SCENE. EMPLOYEE #1 STOOD THE ROLLER ON END, CLIMBED A WORKSTAND, AND BEGAN WELDING WITH A WIRE FEED WELDER. HE MADE ONE SPOT WELD FOR POSITIONING, THEN STOPPED AND ASKED A FELLOW WORKER IF HE HAD SEEN THE "POOF" THAT HAD JUST OCCURRED. EMPLOYEE #1 THEN PROCEEDED AND WAS MAKING THREE MORE SPOT WELDS WHEN THE VAPORS INSIDE THE ROLLER EXPLODED, CAUSING THE WELDMENT TO BE PROPELLED VIOLENTLY UPWARD. THE WELDMENT STRUCK EMPLOYEE #1 IN THE FACE AND HEAD AND CONTINUED UPWARD UNTIL IT STRUCK THE 16-FOOT CEILING AND FELL TO THE FLOOR. EMPLOYEE #1 WAS THROWN BACKWARD TO THE FLOOR.

Keywords: SPOT WELDING, VAPOR, FLAMMABLE VAPORS, WELDER, EXPLOSION, BALER, STRUCK BY, FLYING OBJECT

Investigated Inspection
#	Inspection	Age	Sex	Degree of Injury	Nature of Injury	Occupation
1	111640629			Fatality	Fracture	Machinery maintenance occupations

Thank You for Visiting Our Website

You are exiting the Department of Labor's Web server.

The Department of Labor does not endorse, takes no responsibility for, and exercises no control over the linked organization or its views, or contents, nor does it vouch for the accuracy or accessibility of the information contained on the destination server. The Department of Labor also cannot authorize the use of copyrighted materials contained in linked Web sites. Users must request such authorization from the sponsor of the linked Web site. Thank you for visiting our site. Please click the button below to continue.