Inspection Detail
Inspection: 106279573 - Sauder Woodworking Co.
Inspection Information - Office: Toledo Area Office
Site Address:
Sauder Woodworking Co.
502 Middle St.
Archbold, OH 43502
Mailing Address:
, , 00000
Union Status: NonUnion
SIC:2531
NAICS: 0
Inspection Type: Accident
Scope: Partial
Advanced Notice: N
Ownership: Private
Safety/Health: Safety
Close Conference: 05/17/1990
Planning Guide: Safety-Manufacturing
Emphasis:
Case Closed: 05/07/1991
Type | Activity Nr | Safety | Health |
---|---|---|---|
Accident | 360406680 |
Violations/Penalties | Serious | Willful | Repeat | Other | Unclass | Total |
---|---|---|---|---|---|---|
Initial Violations | 4 | 1 | 2 | 7 | ||
Current Violations | 4 | 1 | 2 | 7 | ||
Initial Penalty | $2,500 | $9,000 | $0 | $0 | $0 | $11,500 |
Current Penalty | $1,500 | $8,000 | $0 | $0 | $0 | $9,500 |
FTA Penalty | $0 | $0 | $0 | $0 | $0 | $0 |
# | Citation ID | Citaton Type | Standard Cited | Issuance Date | Abatement Due Date | Current Penalty | Initial Penalty | FTA Penalty | Contest | Latest Event | Note |
---|---|---|---|---|---|---|---|---|---|---|---|
1. | 01001 | Serious | 19100023 C03 | 07/25/1990 | 07/28/1990 | $200 | $400 | $0 | I - Informal Settlement | ||
2. | 01002 | Serious | 19100213 B05 | 07/25/1990 | 07/28/1990 | $700 | $900 | $0 | I - Informal Settlement | ||
3. | 01003 | Serious | 19100303 E | 07/25/1990 | 07/28/1990 | $350 | $700 | $0 | I - Informal Settlement | ||
4. | 01004 | Serious | 19100305 G01 III | 07/25/1990 | 07/28/1990 | $250 | $500 | $0 | I - Informal Settlement | ||
5. | 02001A | Willful | 19100147 C01 | 07/25/1990 | 05/01/1991 | $8,000 | $9,000 | $0 | P - Petition to Mod Abatement | ||
6. | 02001B | Willful | 19100147 C04 I | 07/25/1990 | 05/01/1991 | $0 | $0 | $0 | P - Petition to Mod Abatement | ||
7. | 03001 | Other | 19040002 A | 07/25/1990 | 07/28/1990 | $0 | $0 | $0 | - | ||
8. | 03002 | Other | 19040004 | 07/25/1990 | 08/02/1990 | $0 | $0 | $0 | - |
Investigation Summary
Employee #1 was performing general maintenance on a Schelling saw (#40105) that was not locked out and was not blocked under the beam. He was removing two 1/2 in. hoses and a junction block that were no longer functional. While Employee #1 was pulling on the hoses to see which one to cut and remove, the hoses tripped the micro switch. The left beam, which weighed approximately 1,500 lb, came down and struck his head. Employee #1, who was on his side, rolled onto his back and, when found, apparently had a pulse for only a minute or two. He died. There was no lockout policy/procedure. The three limit switches are 24 volt DC. The saw motor is a 480 volt with manual shut-off.
Keywords: BEAM, HEAD, MAINTENANCE, BLOCKS, WORK RULES, LOCKOUT, SAW, STRUCK BY, FALLING OBJECT, UNGUARDED
# | Inspection | Age | Sex | Degree of Injury | Nature of Injury | Occupation |
---|---|---|---|---|---|---|
1 | 106279573 | Fatality | Other | Occupation not reported |