Inspection Detail
Inspection: 104240106 - John Deere Ottumwa Works
Inspection Information - Office: Iowa 0751910
Site Address:
John Deere Ottumwa Works
928 E. Vine Street
Ottumwa, IA 52501
Mailing Address:
, , 00000
Union Status: Union
SIC:3548
NAICS: 0
Inspection Type: Accident
Scope: Partial
Advanced Notice: N
Ownership: Private
Safety/Health: Safety
Close Conference: 12/04/1989
Planning Guide: Safety-Manufacturing
Emphasis:
Case Closed: 02/06/1990
| Violations/Penalties | Serious | Willful | Repeat | Other | Unclass | Total |
|---|---|---|---|---|---|---|
| Initial Violations | 1 | 1 | ||||
| Current Violations | 1 | 1 | ||||
| Initial Penalty | $420 | $0 | $0 | $0 | $0 | $420 |
| Current Penalty | $420 | $0 | $0 | $0 | $0 | $420 |
| FTA Penalty | $0 | $0 | $0 | $0 | $0 | $0 |
| # | Citation ID | Citaton Type | Standard Cited | Issuance Date | Abatement Due Date | Current Penalty | Initial Penalty | FTA Penalty | Contest | Latest Event | Note |
|---|---|---|---|---|---|---|---|---|---|---|---|
| 1. | 01001 | Serious | 19100212 A03 II | 12/18/1989 | 01/24/1990 | $420 | $420 | $0 | - |
Investigation Summary
Employee #1 was operating a press brake that was running small pieces measuring 1/2 in. by 1 1/2 in. He was also using hand tools. The press was equipped with a light curtain. The press and light curtain were shut off, but the main switch was still on. When the employee wiped out the bending fixture with his finger, the press cycled and his finger was amputated. It was later found that the foot switch malfunctioned and caused the press to cycle.
Keywords: AMPUTATED, PRESS BRAKE, FINGER, WORK RULES, FOOT CONTROL, LOCKOUT, MECH MALFUNCTION
| # | Inspection | Age | Sex | Degree of Injury | Nature of Injury | Occupation |
|---|---|---|---|---|---|---|
| 1 | 104240106 | Hospitalized injury | Amputation | Punching and stamping press machine operators |
Translate