Inspection Detail
Inspection: 101236305 - Tool Masters Inc
Inspection Information - Office: Birmingham Area Office
Site Address:
Tool Masters Inc
Colbert Industrial Park
Tuscumbia, AL 35674
Mailing Address:
Po Box 586, Tuscumbia, AL 35674
Union Status: NonUnion
SIC:3599
NAICS: 0
Inspection Type: Accident
Scope: Complete
Advanced Notice: N
Ownership: Private
Safety/Health: Safety
Close Conference: 01/21/1987
Planning Guide: Safety-Manufacturing
Emphasis:
Case Closed: 04/07/1987
Type | Activity Nr | Safety | Health |
---|---|---|---|
Accident | 360651467 |
Violations/Penalties | Serious | Willful | Repeat | Other | Unclass | Total |
---|---|---|---|---|---|---|
Initial Violations | 5 | 3 | 8 | |||
Current Violations | 5 | 3 | 8 | |||
Initial Penalty | $640 | $0 | $0 | $0 | $0 | $640 |
Current Penalty | $640 | $0 | $0 | $0 | $0 | $640 |
FTA Penalty | $0 | $0 | $0 | $0 | $0 | $0 |
# | Citation ID | Citaton Type | Standard Cited | Issuance Date | Abatement Due Date | Current Penalty | Initial Penalty | FTA Penalty | Contest | Latest Event | Note |
---|---|---|---|---|---|---|---|---|---|---|---|
1. | 01001 | Serious | 19100212 B | 02/11/1987 | 02/14/1987 | $240 | $240 | $0 | - | ||
2. | 01002A | Serious | 19100215 A02 | 02/11/1987 | 02/17/1987 | $120 | $120 | $0 | - | ||
3. | 01002B | Serious | 19100215 A04 | 02/11/1987 | 02/17/1987 | $0 | $0 | $0 | - | ||
4. | 01003 | Serious | 19100303 B01 | 02/11/1987 | 03/11/1987 | $120 | $120 | $0 | - | ||
5. | 01004 | Serious | 19100303 C | 02/11/1987 | 03/11/1987 | $80 | $80 | $0 | - | ||
6. | 01005 | Serious | 19100305 B01 | 02/11/1987 | 02/17/1987 | $80 | $80 | $0 | - | ||
7. | 02001 | Other | 19100022 D01 | 02/11/1987 | 03/11/1987 | $0 | $0 | $0 | - | ||
8. | 02002 | Other | 19100107 G03 | 02/11/1987 | 02/17/1987 | $0 | $0 | $0 | - | ||
9. | 02003 | Other | 19100219 D01 | 02/11/1987 | 03/11/1987 | $0 | $0 | $0 | - |
Investigation Summary
AT APPROXIMATELY 7:30 AM ON JANUARY 14, 1987, EMPLOYEE #1, AN APPRENTICE MACHINIST, WAS LEVELING THE BED OF A TILTENING V & O 60 TON PUNCH PRESS. AFTER LOOSENING THE TWO BOLTS ON THE SIDES OF THE PRESS AT THE SLIDE GROOVES, HE WENT AROUND TO THE REAR OF THE MACHINE TO ADJUST THE CAST IRON SPANNER NUT SCREW (LEVELING JACK). THE NUT FAILED, CAUSING THE PRESS TO FALL BACK TO THE FLOOR. THE FALLING PUNCH PRESS CRUSHED EMPLOYEE #1 INTO A "DOUBLED UP" POSITION. HE DIED OF A BROKEN BACK.
Keywords: FRACTURE, MAINTENANCE, MACHINIST, BACK, CRUSHED, STRUCK BY, FALLING OBJECT, PUNCH PRESS
# | Inspection | Age | Sex | Degree of Injury | Nature of Injury | Occupation |
---|---|---|---|---|---|---|
1 | 101236305 | Fatality | Concussion | Occupation not reported |