Standard Interpretations
RSS Standard Interpretations Subscribe to our RSS Standard Interpretations feed.
Standard Interpretations are letters or memos written in response to public inquiries or field office inquiries regarding how some aspect of or terminology in an OSHA standard or regulation is to be interpreted and enforced by the Agency. These letters provide guidance to clarify the application of an established OSHA standard, policy, or procedure, but they may not, in themselves, establish or revise OSHA policy or procedure or interpret the OSH Act. They must specifically cite the source policy or procedure document they interpret.
- 1926.754 - Decision to release the new compliance directive for the steel erection standard in draft form. - 12/21/2001
- 1926.754 - Enforcement of Steel Erection Subpart R. - 05/21/2012
- 1926.754 - History and background of the Steel Erection Final Rule. - 09/27/2001
- 1926.754 - Sheer connector requirements in the steel erection standard to bridge repair/rehabilitation. - 01/23/2003
- 1926.754(b)(3) - Enforcement of Steel Erection Subpart R. - 05/21/2012
- 1926.754(c)(1) - "Threaded studs" are prohibited from being installed prior to decking when they project. - 12/11/2003
- 1926.754(c)(1) - Bridge construction will not be exempted from the sheer connector requirements of 1926.754(c)(1). - 12/27/2001
- 1926.754(c)(1) - Clarification regarding shop installed continuous bent plate in steel erection - 06/19/2014
- 1926.754(c)(1) - Evaluation of shop-installed angle iron on the top beam flange in Steel Erection. - 12/24/2003
- 1926.754(c)(1) - Sheer connector requirements in the steel erection standard to bridge repair/rehabilitation. - 01/23/2003
- 1926.754(e)(3)(i) - Compliance of Purlin Glide to OSHA steel erection standards. - 01/15/2003
- 1926.754(e)(3)(i) - Whether certain skylights meet the cover criteria of 1926 Subpart M. - 12/20/2007
- 1926.754(e)(3)(iv) - Whether certain skylights meet the cover criteria of 1926 Subpart M. - 12/20/2007