- Part Number:1926
- Part Number Title:SAFETY AND HEALTH REGULATIONS FOR CONSTRUCTION
- Subpart:1926 Subpart I
- Subpart Title:Tools - Hand and Power
- Standard Number:
- Title:Air receivers.
- GPO Source:
"General requirements" -
"Application." This section applies to compressed air receivers, and other equipment used in providing and utilizing compressed air for performing operations such as cleaning, drilling, hoisting, and chipping. On the other hand, however, this section does not deal with the special problems created by using compressed air to convey materials nor the problems created when men work in compressed air as in tunnels and caissons. This section is not intended to apply to compressed air machinery and equipment used on transportation vehicles such as steam railroad cars, electric railway cars, and automotive equipment.
"New and existing equipment."
"Installation and equipment requirements" -
"Installation." Air receivers shall be so installed that all drains, handholes, and manholes therein are easily accessible. Under no circumstances shall an air receiver be buried underground or located in an inaccessible place.
"Drains and traps." A drain pipe and valve shall be installed at the lowest point of every air receiver to provide for the removal of accumulated oil and water. Adequate automatic traps may be installed in addition to drain valves. The drain valve on the air receiver shall be opened and the receiver completely drained frequently and at such intervals as to prevent the accumulation of excessive amounts of liquid in the receiver.
"Gages and valves."
[58 FR 35176, June 30, 1993]