1
|
- 1926.502(b) - Fall protection for workers having to walk/work along bridge decks when the edges are finished with a 32 in. high barrier wall.
|
2
|
- 1926.502(b) - Use of a warning line instead of conventional fall protection; Part 1926 Subpart M
|
3
|
- 1926.502(b) - Clarification if a depression constitutes a hole or unprotected side/edge and associated fall protection requirements.
|
4
|
- 1926.502(b) - Wire rope clips on suspension scaffolds; safety latches on large crane hooks; order of assembly for hanging scaffolds; and horizontal lifeline design.
|
5
|
- 1926.502(b) - Fall protection requirements for employees, other than roofers, working on low-slope roofs
|
6
|
- 1926.502(b) - Acceptable use of warning lines as fall protection for roofers and other trades.
|
7
|
- 1926.502(b) - Fall protection non-conforming guardrail criteria for application of a de minimis policy.
|
8
|
- 1926.502(b) - Policy for descent control devices used in construction.
|
9
|
- 1926.502(b) - Waist/chest strap as part of full body harness.
|
10
|
- 1926.502(b)(1) - Guardrail height when used as fall protection for work surfaces with two elevations.
|
11
|
- 1926.502(b)(1) - Evaluation of Fiber-Lam "Super Brace" compliance with construction fall protection requirements for guarding structural openings.
|
12
|
- 1926.502(b)(3) - Evaluation of Fiber-Lam "Super Brace" compliance with construction fall protection requirements for guarding structural openings.
|
13
|
- 1926.502(b)(4) - Evaluation of Fiber-Lam "Super Brace" compliance with construction fall protection requirements for guarding structural openings.
|
14
|
- 1926.502(b)(1) - Guardrail height requirements for construction activities in General Industry Facilities.
|
15
|
- 1926.502(b)(10) - Compliance of using warning lines and/or control access zones for fall protection on roofs with a slope greater than 4:12.
|
16
|
- 1926.502(b)(2)(i) - Compliance of using warning lines and/or control access zones for fall protection on roofs with a slope greater than 4:12.
|
17
|
- 1926.502(b)(3) - Spacing of the posts in between modular guardrail system sections.
|