# Federal Register
1 - 81:82494-83006 - Walking-Working Surfaces and Personal Protective Equipment (Fall Protection Systems) - PDF
2 - 81:62052-62066 - Fall Protection in Shipyard Employment - PDF
3 - 63:52298-52300 - Submission for OMB Review; Comment Request - PDF
4 - 63:34933-34934 - Walking-Working Surfaces; Information Collection Requirements. - PDF
5 - 56:8801 - Grant of Variance
6 - 55:29224-29 - Extension of Written Comment Period and Scheduled Hearing on Proposed Rule on Walking and Working Surfaces and Personal Protective Equipment (Fall Protection Systems)
7 - 49:5318 - Guarding Floor/Wall Openings
8 - 49:5318 - Revocation of Advisory and Repetitive Standards
9 - 47:23479 - Guarding Floor/Wall Openings
10 - 42:55291 - Variance
11 - 42:54028 - Variance
12 - 41:56410-56411 - Variance
# Regulations
1 - 1910.23 - Ladders.
# Standard Interpretations
1 - 1910.23 - Inspection Guidance for Inpatient Healthcare Settings
2 - 1910.23 - Guarding of Ladderway Floor Openings
3 - 1910.23 - Clarification of OSHA requirements pertaining to winding stairway systems.
4 - 1910.23 - Guarding of Access Openings to Fixed Ladders.
5 - 1910.23 - Compliance of stair and platform railings with height requirements in OSHA standards for fixed industrial stairs.
6 - 1910.23 - Guarding requirements for skylights and "grandfather" provisions for buildings constructed over twenty years ago.
7 - 1910.23 - Alternative fall protection program when guardrails are infeasible to install.
8 - 1910.23 - Acceptability of slip on fittings on stair rails and requirement for stair rails to be smooth surfaced.
9 - 1910.23 - Acceptability of a fixed ramp with a one-in-four slope on an industrial conveyor.
10 - 1910.23 - Ladder safety requirements for towers more than 20 feet in length: sliding fall protection devices, safety cages/wells, landing platform intervals.
11 - 1910.23 - Additional fall protection requirements for concrete trucks when work platforms are equipped with guardrails and toeboards.
12 - 1910.23 - Open roof hatches should be protected; grab bars not required at hatch exits.
13 - 1910.23 - OSHA requires fall protection for elevator work when a fall hazard is present.
14 - 1910.23 - General Industry Standard as it applies to the electric utility industry.
15 - 1910.23 - Fall Protection requirements in the Construction Standard.
16 - 1910.23 - Spacing requirements between two handrails.
17 - 1910.23 - Use of toeboards to protect a floor hole and variations in riser heights for stairs.
18 - 1910.23 - Conveyor Crossover Stile.
19 - 1910.23 - OSHA's requirements for locking type snaphooks on pole strap systems.
20 - 1910.23 - Ramps: guarding and means of access to a higher elevation.
21 - 1910.23 - Interpretation Regarding Guardrails Proposed for Coors Stadium.
22 - 1910.23 - Toeboard requirements on walkways over interior of a water tank.
23 - 1910.23 - Platforms and ladders on communication towers.
24 - 1910.23 - Toe clearances on ladders.
25 - 1910.23 - Nominal vertical height requirement for toe boards.
26 - 1910.23 - Ladderway floor openings.
27 - 1910.23 - Fall protection for employees exposed to hazardous falls from roofs.
28 - 1910.23 - Safeguarding of floor holes between platforms and equipment.
29 - 1910.23 - Clarification of our railing requirements in 29 CFR 1910.23(e).
30 - 1910.23 - Clarification of 1910.23 as it would apply to repair pits.
31 - 1910.23 - The use of a safety chain in lieu of a gate.
32 - 1910.23 - Tip-up rigid guardrail system.
33 - 1910.23 - Proposed Powered Platform installations.
34 - 1910.23 - The positioning of the safety line on billboards.
35 - 1910.23 - The enforcement of 29 CFR 1910.23(a)(9), for floor openings and holes.
36 - 1910.23 - Sectionalized rail systems.
37 - 1910.23 - Clarification of 1910.23(c)(1).
38 - 1910.23 - Loading docks.