1
04/22/2005
- 1910.212(a)(3)(ii) - Lock out/Tag out (LOTO) requirements for die-setting operations in hydraulic power presses.
2
06/05/2001
- 1910.212(a)(3)(ii) - Use of Electro Sensitive Protection Equipment as point of operation guarding devices.
3
02/26/1999
- 1910.212(a)(3)(ii) - OSHA enforcement policy on vertical food mixers.
4
09/20/1994
- 1910.212(a)(3)(ii) - Standard 1910.212 in regards to its applicability to guard an area above the ram/piston on a vertical hydraulic downstroke/trash compactor.
5
08/05/1992
- 1910.212(a)(3)(ii) - Presence Sensing Palm Button Devices (PSPBD).
6
04/15/1991
- 1910.212(a)(3)(ii) - Clarification of Scope of OSHA Instruction STD 1-12.22
7
03/19/1991
- 1910.212(a)(3)(ii) - The point of operation and rotating part hazards related to vertical food mixers in bakeries and restaurants are covered by the Occupational Safety and Health Administration standards.
8
08/03/1989
- 1910.212(a)(3)(ii) - The feasibility of OSHA's machine guarding requirements in their workplace.
9
11/02/1987
- 1910.212(a)(3)(ii) - Acceptable guarding for continuous cycling boneless meat tenderizers.
10
08/08/1986
- 1910.212(a)(3)(ii) - The safe use of portable, compressed-air-actuated, fastener driving tools (staple guns)
11
04/20/1986
- 1910.212(a)(3)(ii) - Power Press Brakes.
12
03/25/1985
- 1910.212(a)(3)(ii) - Applicability of 1910.212(a)(3)(ii) to Portable Pneumatic Powered Fastener Tools
13
05/26/1981
- 1910.212(a)(3)(ii) - The manner in which OSHA provides for suitable applications of the ANSI B11.3 specification standard.
14
12/15/1980
- 1910.212(a)(3)(ii) - Oil Rig Inspection.
15
02/18/1976
- 1910.212(a)(3)(ii) - Point of operation guarding for cutters on milling machines.
16
01/07/1975
- 1910.212(a)(3)(ii) - Guarding by location is permitted with certain provisions.