This is the version of 29 CFR 1910.269 that was in effect on April 11, 2014. As of July 10, 2014, this version of 29 CFR 1910.269 is no longer in effect. In accordance with OSHA's temporary enforcement policy dated June 20, 2014, compliance with this version of 29 CFR 1910.269 will be accepted as compliance with the current versions of 29 CFR 1910.269 and 29 CFR 1926, Subpart V through October 31, 2014.
| Part Number:||1910|
| Part Title:||Occupational Safety and Health Standards|
| Subpart Title:||Special Industries|
| Standard Number:||1910.269 App E|
| Title:||Reference Documents.|
The references contained in this appendix provide information that can be helpful in understanding and complying with the requirements contained in 1910.269. The national consensus standards referenced in this appendix contain detailed specifications that employers may follow in complying with the more performance-oriented requirements of OSHA's final rule. Except as specifically noted in 1910.269, however, compliance with the national consensus standards is not a substitute for compliance with the provisions of the OSHA standard.
ANSI/SIA A92.2-1990, American National Standard for Vehicle-Mounted Elevating and Rotating Aerial Devices.
ANSI C2-1993, National Electrical Safety Code.
ANSI Z133.1-1988, American National Standard Safety Requirements for Pruning, Trimming, Repairing, Maintaining, and Removing Trees, and for Cutting Brush.
ANSI/ASME B20.1-1990, Safety Standard for Conveyors and Related Equipment.
ANSI/IEEE Std. 4-1978 (Fifth Printing), IEEE Standard Techniques for High-Voltage Testing.
ANSI/IEEE Std. 100-1988, IEEE Standard Dictionary of Electrical and Electronic Terms.
ANSI/IEEE Std. 516-1987, IEEE Guide for Maintenance Methods on Energized Power-Lines.
ANSI/IEEE Std. 935-1989, IEEE Guide on Terminology for Tools and Equipment to Be Used in Live Line Working.
ANSI/IEEE Std. 957-1987, IEEE Guide for Cleaning Insulators.
ANSI/IEEE Std. 978-1984 (R1991), IEEE Guide for In-Service Maintenance and Electrical Testing of Live-Line Tools.
ASTM D 120-87, Specification for Rubber Insulating Gloves.
ASTM D 149-92, Test Method for Dielectric Breakdown Voltage and Dielectric Strength of Solid Electrical Insulating Materials at Commercial Power Frequencies.
ASTM D 178-93, Specification for Rubber Insulating Matting.
ASTM D 1048-93, Specification for Rubber Insulating Blankets.
ASTM D 1049-93, Specification for Rubber Insulating Covers.
ASTM D 1050-90, Specification for Rubber Insulating Line Hose.
ASTM D 1051-87, Specification for Rubber Insulating Sleeves.
ASTM F 478-92, Specification for In-Service Care of Insulating Line Hose and Covers.
ASTM F 479-93, Specification for In-Service Care of Insulating Blankets.
ASTM F 496-93B, Specification for In-Service Care of Insulating Gloves and Sleeves.
ASTM F 711-89, Specification for Fiberglass-Reinforced Plastic (FRP) Rod and Tube Used in Live Line Tools.
ASTM F 712-88, Test Methods for Electrically Insulating Plastic Guard Equipment for Protection of Workers.
ASTM F 819-83a (1988), Definitions of Terms Relating to Electrical Protective Equipment for Workers.
ASTM F 855-90, Specifications for Temporary Grounding Systems to Be Used on De-Energized Electric Power Lines and Equipment.
ASTM F 887-91a, Specifications for Personal Climbing Equipment.
ASTM F 914-91, Test Method for Acoustic Emission for Insulated Aerial Personnel Devices.
ASTM F 968-93, Specification for Electrically Insulating Plastic Guard Equipment for Protection of Workers.
ASTM F 1116-88, Test Method for Determining Dielectric Strength of Overshoe Footwear.
ASTM F 1117-87, Specification for Dielectric Overshoe Footwear.
ASTM F 1236-89, Guide for Visual Inspection of Electrical Protective Rubber Products.
ASTM F 1505-94, Standard Specification for Insulated and Insulating Hand Tools.
ASTM F 1506-94, Standard Performance Specification for Textile Materials for Wearing Apparel for Use by Electrical Workers Exposed to Momentary Electric Arc and Related Thermal Hazards.
IEEE Std. 62-1978, IEEE Guide for Field Testing Power Apparatus Insulation.
IEEE Std. 524-1992, IEEE Guide to the Installation of Overhead Transmission Line Conductors.
IEEE Std. 1048-1990, IEEE Guide for Protective Grounding of Power Lines.
IEEE Std. 1067-1990, IEEE Guide for the In-Service Use, Care, Maintenance, and Testing of Conductive Clothing for Use on Voltages up to 765 kV AC.
- [59 FR 4437, Jan. 31, 1994; 59 FR 33658, June 30, 1994; 59 FR 40729, Aug. 9, 1994]