Quick Reference Guide to the Bloodborne Pathogens Standard

  1. What is the Bloodborne Pathogens standard?

    OSHA's Bloodborne Pathogens standard (29 CFR 1910.1030) as amended pursuant to the Needlestick Safety and Prevention Act of 2000, prescribes safeguards to protect workers against the health hazards caused by bloodborne pathogens. Its requirements address items such as exposure control plans, universal precautions, engineering and work practice controls, personal protective equipment, housekeeping, laboratories, hepatitis B vaccination, post-exposure follow-up, hazard communication and training, and recordkeeping. The standard places requirements on employers whose workers can be reasonably anticipated to contact blood or other potentially infectious materials (OPIM), such as unfixed human tissues and certain body fluids.

  2. What is the Needlestick Safety and Prevention Act?

    The Needlestick Safety and Prevention Act (the Act) (Pub. L. 106-430) was signed into law on November 6, 2000. Because occupational exposure to bloodborne pathogens from accidental sharps injuries in healthcare and other occupational settings continues to be a serious problem, Congress required modification of OSHA's Bloodborne Pathogens standard (29 CFR 1910.1030) to set forth in greater detail (and make more specific) OSHA's requirement for employers to identify, evaluate and implement safer medical devices such as needleless systems and sharps with engineered sharps protections. The Act also mandated additional requirements for maintaining a sharps injury log and for the involvement of non-managerial healthcare workers in identifying, evaluating and choosing effective engineering and work practice controls. These are workers who are responsible for direct patient care and be potentially exposed to injuries from contaminated sharps.

  3. How does the Needlestick Safety and Prevention Act apply to OSHA's Bloodborne Pathogens standard?

    The Act directed OSHA to revise its Bloodborne Pathogens standard (29 CFR 1910.1030). OSHA published the revised standard in the Federal Register on January 18, 2001; it took effect on April 18, 2001. The requirement to implement the use of engineering controls, which includes safer medical devices, has been in effect since 1992.

  4. How does the standard affect states that operate their own federally-approved occupational safety and health programs?

    States and territories that operate their own OSHA-approved state programs are required to adopt a Bloodborne Pathogens standard that is at least as effective as the Federal OSHA standard.

  5. Does the standard apply to public sector (state and local government) employees?

    The 25 states and two territories that operate OSHA-approved state plans are required to enforce an "at least as effective" standard in the public sector. In the remaining states where Federal OSHA has jurisdiction, hospitals in the public sector are required to comply with the Bloodborne Pathogens standard with enforcement by the Centers for Medicare and Medicaid Services (42 U.S.C. 1395cc(a)(1)(V) and (b)(4)).

  6. Do the Bloodborne Pathogens standard and the Needlestick Safety and Prevention Act apply to me?

    OSHA's Bloodborne Pathogens standard, including its 2001 revisions, applies to all employers who have an employee(s) with occupational exposure (i.e., reasonably anticipated skin, eye, mucous membrane, or parenteral contact with blood or other potentially infectious materials (OPIM) that may result from the performance of the employee's duties). These employers must implement the requirements set forth in the standard. Some of the new and clarified provisions in the standard apply only to healthcare settings, but other provisions, particularly the requirements to update the Exposure Control Plan and to keep a sharps injury log, apply to non-healthcare as well as healthcare settings.

  7. What does the standard say about the use of safer medical devices?

    The standard states, "engineering and work practice controls shall be used to eliminate or minimize employee exposure." The 2001 revision defines engineering controls as "controls (e.g., sharps disposal containers, self-sheathing needles, safer medical devices, such as sharps with engineered sharps injury protections and needleless systems) that isolate or remove the bloodborne pathogens hazard from the workplace." Employers who have employees exposed to contaminated sharps must consider and implement appropriate commercially available and effective safer medical devices designed to eliminate or minimize occupational exposure. Also, employees with occupational exposure must be trained in the use and limitations of methods that will prevent or reduce exposure, including appropriate engineering controls, work practices and personal protective equipment. Therefore, training must include instruction on any new techniques and practices associated with new engineering controls.

  8. If I've never had an employee experience a needlestick, do I still need to use safer devices?

    Yes. OSHA standards are intended to be implemented as a means to prevent occupational injuries and illnesses. To most effectively avoid percutaneous injuries from contaminated sharps, employers must implement engineering controls, including safer medical devices, so that employees have them available to use.

  9. How many non-managerial employees do I need to include in the process of choosing safer medical devices?

    Small medical offices may want to seek input from all occupationally exposed employees when making their decisions. Larger facilities are not required to request input from all exposed employees; however, the employees selected should represent the range of exposure situations encountered in the workplace (e.g., pediatrics, emergency department, etc.). Regardless of the number chosen, in order to be included in the process the workers must be responsible for direct patient care and be potentially exposed to injuries from contaminated sharps. The solicitation of employees who have been involved in the input and evaluation process must be documented in the Exposure Control Plan.

  10. Does OSHA have a list of available safer medical devices?

    No. OSHA does not approve or endorse any product. It is the employer's responsibility to identify and implement appropriate, commercially available and effective safer medical devices for the specific medical procedures being conducted.

  11. What if a safer option is not available for the medical device that I use?

    A key element in choosing a safer medical device, other than its appropriateness to the procedure and its effectiveness, is its availability on the market. If there is no safer option to the medical device that you are using for a particular procedure, you are not required to adopt a device different from the one currently being used. During your annual review of devices, you must consider new or prospective safer options and document this fact in your written Exposure Control Plan. With advances in medical technology, more devices are becoming available for different procedures. If no engineering control is available, work practice controls shall be used and, if occupational exposure still remains, personal protective equipment must also be used.

  12. Do I have to keep a sharps injury log? Does it have to be confidential?

    If, as an employer, you are required to maintain a log of occupational injuries and illnesses under 29 CFR Part 1904, you must also establish and maintain a sharps injury log for recording percutaneous injuries from contaminated sharps. The sharps injury log must contain, at a minimum, the type and brand of device involved in the injury (if known), the department or work area where the exposure incident occurred, and an explanation of how the incident occurred. The log must be recorded and maintained in a manner that protects the confidentiality of the injured worker (e.g., removal of personal identifiers).

  13. Does the revised Bloodborne Pathogens standard apply to medical or dental offices that have fewer than 10 employees?

    OSHA's Bloodborne Pathogens standard applies to all employers with employees who have occupational exposure to blood or other potentially infectious materials (OPIM), regardless of how many workers are employed. However, the offices and clinics of medical doctors and dentists are exempt from the requirement to keep a log of occupational injuries and illnesses and thus exempt from maintaining a sharps injury log. (See Appendix A to Subpart B of 29 CFR Part 1904.) All other applicable provisions of the Bloodborne Pathogens standard still apply.

  14. What information do I need to include in my written Exposure Control Plan (ECP)? How often do I need to update it?

    The required elements of an ECP are:

    • The exposure determination which identifies job classifications with occupational exposure and tasks and procedures where there is occupational exposure and that are performed by employees in job classifications in which some employees have occupational exposure;
    • The procedures for evaluating the circumstances surrounding exposure incidents;
    • A schedule of how other provisions of the standard are implemented, including methods of compliance, HIV and HBV research laboratories and production facilities requirements, hepatitis B vaccination and post-exposure evaluation and follow-up, communication of hazards to employees, and recordkeeping;

      Methods of compliance include:

      • Universal Precautions;
      • Engineering and work practice controls, e.g., safer medical devices, sharps disposal containers, hand hygiene;
      • Personal protective equipment;
      • Housekeeping, including decontamination procedures and removal of regulated waste.
    • Documentation of:
      • the annual consideration and implementation of appropriate commercially available and effective safer medical devices designed to eliminate or minimize occupational exposure, and
      • the solicitation of non-managerial healthcare workers (who are responsible for direct patient care and are potentially exposed to injuries from contaminated sharps) in the identification, evaluation, and selection of effective engineering and work practice controls.

    The ECP must be reviewed and updated at least annually, and whenever necessary to reflect new or modified tasks and procedures which affect occupational exposure and to reflect new or revised employee positions with occupational exposure.

  15. Are employers responsible for providing sharps containers for employees who are diabetic and need insulin shots in a non-healthcare related facility?

    The employer would not be required to provide a sharps container to an employee using insulin syringes for personal therapeutic reasons. To eliminate potential exposures to other workers, however, the employer could require that the employee provide his or her own workplace sharps container.

  16. What does OSHA currently accept as "appropriate" disinfectants to prevent the spread of HIV and HBV

    OSHA's position is that EPA-registered tuberculocidal disinfectants, diluted bleach solutions and EPA-registered disinfectants that are labeled as effective against both HIV and HBV as well as Sterilants/High-Level Disinfectants cleared by the FDA, meet the requirement in the standard and are "appropriate" disinfectants to clean contaminated surfaces, provided that such surfaces have not become contaminated with agent(s) or volumes of or concentrations of agent(s) for which higher level disinfection is recommended.

    It is important to emphasize the EPA-approved label section titled "SPECIAL INSTRUCTIONS FOR CLEANING AND DECONTAMINATION AGAINST HIV-1 AND HBV OF SURFACES\OBJECTS SOILED WITH BLOOD\BODY FLUIDS." These instructions require:

    • that personal protective equipment be provided for the worker performing the task;
    • that all the blood must be cleaned up thoroughly before applying the disinfectant;
    • that the disposal of the infectious waste be in accordance with federal, state, or local regulations; and
    • that the surface be left wet with the disinfectant for 30 seconds for HIV-1 and for 10 minutes for HBV.
  17. Is a Hepatitis B (HBV) post-vaccination titer required?

    29 CFR 1910.1030(f)(1)(ii)(D) takes into consideration the changing nature of medical treatment relating to hepatitis B. OSHA requires use of the U.S. Public Health Service (USPHS) guidelines current at the time of the evaluation or procedure. The most current guidelines regarding hepatitis B is the Updated U.S. Public Health Service Guidelines for the Management of Occupational Exposures to HBV, HCV, and HIV and Recommendations for Postexposure Prophylaxis in MMWR, Vol. 50, No.11, June 29, 2001. The hepatitis B vaccination must be given in the standard dose and through the standard route of administration, as recommended in the guidelines. Employees who have ongoing contact with patients or blood and are at ongoing risk for percutaneous injuries must be tested for antibody to hepatitis B surface antigen, one to two months after the completion of the three-dose vaccination series. Employees who do not respond to the primary vaccination series must be revaccinated with a second three-dose vaccine series and retested. Non-responders to the second series must be medically evaluated.

  18. Are workers who administer the vaccines in emergency situations (e.g., in a pandemic response) covered by the Bloodborne Pathogens standard

    The Bloodborne Pathogens standard covers all workers in the private sector as well as civilian employees of federal entities. State and local government employees are covered if they are in one of the 25 states and two territories that operate their own OSHA-approved state plans. In the remaining jurisdictions, where Federal OSHA has authority, hospitals operated by state, territorial or local governments are required to provide the protection of the Bloodborne Pathogens standard to their employees with enforcement by the Centers for Medicare and Medicaid Services (42 U.S.C. 1395cc(a)(1)(V) and (b)(4)).

    Additionally, the CDC recommends that all vaccination clinics comply with the Bloodborne Pathogens standard's provisions.

  19. Where can I get information about what is expected of me?

    There are several resources available for employers and employees with regard to occupational exposures to blood and OPIM. First is the OSHA Bloodborne Pathogens standard (29 CFR 1910.1030). Also available are CPL 2-2.69 (November 2001) Enforcement Procedures for the Occupational Exposure to Bloodborne Pathogens, and many other related documents. This information can be found on OSHA's Bloodborne Pathogens and Needlestick Prevention Web Page. You may access additional information, such as information from OSHA's Consultation and State Plan State Offices, via OSHA's website or by phone at 1-800-321-OSHA (6742). CDC and the National Institute for Occupational Safety and Health (NIOSH), a CDC agency, also have documents related to the prevention of occupational exposure to blood and OPIM available.