Final Rule to Update General Industry Walking-Working Surfaces and Fall Protection Standards
Falls from heights and on the same level (a working surface) are among the leading causes of serious work-related injuries and deaths. OSHA has issued a final rule on Walking-Working Surfaces and Personal Fall Protection Systems to better protect workers in general industry from these hazards by updating and clarifying standards and adding training and inspection requirements.
The rule affects a wide range of workers, from painters to warehouse workers. It does not change construction or agricultural standards.
The rule incorporates advances in technology, industry best practices, and national consensus standards to provide effective and cost-efficient worker protection. Specifically, it updates general industry standards addressing slip, trip, and fall hazards (subpart D), and adds requirements for personal fall protection systems (subpart I).
OSHA estimates that these changes will prevent 29 fatalities and 5,842 lost-workday injuries every year.
Benefits to Employers
The rule benefits employers by providing greater flexibility in choosing a fall protection system. For example, it eliminates the existing mandate to use guardrails as a primary fall protection method and allows employers to choose from accepted fall protection systems they believe will work best in a particular situation - an approach that has been successful in the construction industry since 1994. In addition, employers will be able to use non-conventional fall protection in certain situations, such as designated areas on low-slope roofs.
As much as possible, OSHA aligned fall protection requirements for general industry with those for construction, easing compliance for employers who perform both types of activities. For example, the final rule replaces the outdated general industry scaffold standards with a requirement that employers comply with OSHA's construction scaffold standards.
Most of the rule will become effective January 17, 2017, 60 days after publication in the Federal Register, but some provisions have delayed effective dates, including:
- Ensuring exposed workers are trained on fall hazards (May 17, 2017),
- Ensuring workers who use equipment covered by the final rule are trained (May 17, 2017),
- Inspecting and certifying permanent anchorages for rope descent systems (November 20, 2017),
- Installing personal fall arrest or ladder safety systems on new fixed ladders over 24 feet and on replacement ladders/ladder sections, including fixed ladders on outdoor advertising structures (November 19, 2018),
- Ensuring existing fixed ladders over 24 feet, including those on outdoor advertising structures, are equipped with a cage, well, personal fall arrest system, or ladder safety system (November 19, 2018), and
- Replacing cages and wells (used as fall protection) with ladder safety or personal fall arrest systems on all fixed ladders over 24 feet (November 18, 2036).