Clarification concerning fall protection and vertical walled trenches with depth of 6 feet or greater and use of controlled access zones.

OSHA requirements are set by statute, standards and regulations. Our interpretation letters explain these requirements and how they apply to particular circumstances, but they cannot create additional employer obligations. This letter constitutes OSHA's interpretation of the requirements discussed. Note that our enforcement guidance may be affected by changes to OSHA rules. Also, from time to time we update our guidance in response to new information. To keep apprised of such developments, you can consult OSHA's website at https://www.osha.gov.

June 24, 2002 [Revised 12/5/2012]

Ned McDougald
4170 W. Menlo
Fresno, CA 93722

Dear Mr. McDougald:

This is in response to your letter of April 22, 2002, requesting an interpretation of fall protection requirements when working around trenches. Specifically, you ask if fall protection is required around vertical walled trenches that have a depth 6 feet or greater; if there are any exceptions to fall protection around trenches implied or stated; and whether a controlled access zone be used in lieu of fall protection.

Compliance of using warning lines and/or control access zones for fall protection on roofs with a slope greater than 4:12.

OSHA requirements are set by statute, standards and regulations. Our interpretation letters explain these requirements and how they apply to particular circumstances, but they cannot create additional employer obligations. This letter constitutes OSHA's interpretation of the requirements discussed. Note that our enforcement guidance may be affected by changes to OSHA rules. Also, from time to time we update our guidance in response to new information. To keep apprised of such developments, you can consult OSHA's website at https://www.osha.gov.

September 26, 2003

Mr. Michael C. Wright, PE, CSP, CPE
Managing Principal
LJB, Inc.
3100 Research Blvd.
PO Box 20246
Dayton, OH 45420-0246

Re: Whether warning lines and/or control access zones can be employed for roofing work (residential and non-residential) on roofs with a slope greater than 4:12

Dear Mr. Wright:

Fall protection and controlled access zones for overhand bricklaying

OSHA requirements are set by statute, standards and regulations. Our interpretation letters explain these requirements and how they apply to particular circumstances, but they cannot create additional employer obligations. This letter constitutes OSHA's interpretation of the requirements discussed. Note that our enforcement guidance may be affected by changes to OSHA rules. Also, from time to time we update our guidance in response to new information. To keep apprised of such developments, you can consult OSHA's website at https://www.osha.gov.

March 10, 2004

Mr. Luis M. Moreno
7108 NW 73rd Street
Tamarac, FL 33321

Re: Fall protection and controlled access zones in overhand bricklaying and related work; 29 CFR 1926.501(b)(4) and (9), 1926.502(g)

Dear Mr. Moreno: