Hatch Net 120 fall protection system

OSHA requirements are set by statute, standards and regulations. Our interpretation letters explain these requirements and how they apply to particular circumstances, but they cannot create additional employer obligations. This letter constitutes OSHA's interpretation of the requirements discussed. Note that our enforcement guidance may be affected by changes to OSHA rules. Also, from time to time we update our guidance in response to new information. To keep apprised of such developments, you can consult OSHA's website at https://www.osha.gov.

April 15, 1994

Mr. Roger Dargie
President
Safe Approach Inc.
P.O. Box 1473
Auburn, Maine 04211

Dear Mr. Dargie:

This is in response to your February 7 letter requesting Occupational Safety and Health Administration (OSHA) acceptance of the Hatch Net 120 fall protection system. I apologize for the delay in responding to your inquiry.

Clarification of the terms "hole" versus "unprotected sides or edges."

OSHA requirements are set by statute, standards and regulations. Our interpretation letters explain these requirements and how they apply to particular circumstances, but they cannot create additional employer obligations. This letter constitutes OSHA's interpretation of the requirements discussed. Note that our enforcement guidance may be affected by changes to OSHA rules. Also, from time to time we update our guidance in response to new information. To keep apprised of such developments, you can consult OSHA's website at https://www.osha.gov.

August 14, 2000

Mr. Reed Taylor, Safety Director
Taylor Bros. Construction Co. Inc.
4555 Middle Road
P.O. Box 248
Columbus, Indiana 47202-0248

Re: Subpart M, 1926.500, 1926.501(b)(1), 1926.501(b)(4), 1926.32(f)

Dear Mr. Taylor:

This is in response to your December 1, 1999 letter to the Occupational Safety and Health Administration (OSHA) in which you ask for a clarification of OSHA's fall protection requirements. We apologize for the delay in providing this response.

Fall protection and controlled access zones for overhand bricklaying

OSHA requirements are set by statute, standards and regulations. Our interpretation letters explain these requirements and how they apply to particular circumstances, but they cannot create additional employer obligations. This letter constitutes OSHA's interpretation of the requirements discussed. Note that our enforcement guidance may be affected by changes to OSHA rules. Also, from time to time we update our guidance in response to new information. To keep apprised of such developments, you can consult OSHA's website at https://www.osha.gov.

March 10, 2004

Mr. Luis M. Moreno
7108 NW 73rd Street
Tamarac, FL 33321

Re: Fall protection and controlled access zones in overhand bricklaying and related work; 29 CFR 1926.501(b)(4) and (9), 1926.502(g)

Dear Mr. Moreno:

Duty of a subcontractor to cover floor holes in a Multi-Employer work site.

OSHA requirements are set by statute, standards and regulations. Our interpretation letters explain these requirements and how they apply to particular circumstances, but they cannot create additional employer obligations. This letter constitutes OSHA's interpretation of the requirements discussed. Note that our enforcement guidance may be affected by changes to OSHA rules. Also, from time to time we update our guidance in response to new information. To keep apprised of such developments, you can consult OSHA's website at https://www.osha.gov.

November 17, 2004

Mr. Joe Mocka
Roughneck Concrete
Drilling & Sawing Co.
8400 Lehigh Avenue
Morton Grove, IL 60053-2617

Re: 29 CFR 1926.501(b)(4); 1926.502(i); CPL 02-00-124; Duty of a subcontractor to cover floor holes in a Multi-Employer worksite.

Dear Mr. Mocka:

This is in response to your letter submitted on April 12, 2004, to the Occupational Safety and Health Administration (OSHA). We apologize for the delay in responding.

When protective measures must be installed after a hole is created on a construction worksite.

OSHA requirements are set by statute, standards and regulations. Our interpretation letters explain these requirements and how they apply to particular circumstances, but they cannot create additional employer obligations. This letter constitutes OSHA's interpretation of the requirements discussed. Note that our enforcement guidance may be affected by changes to OSHA rules. Also, from time to time we update our guidance in response to new information. To keep apprised of such developments, you can consult OSHA's website at https://www.osha.gov.

September 5, 2006

Mr. Albert C. Rauck
980 Landings Loop Dr. N.
Westerville, OH 43082

Re: When protective measures must be installed after a hole is created on a construction worksite. 29 CFR 1926.500(b), 29 CFR 1926.501(b)(4).

Dear Mr. Rauck:

Whether certain skylights meet the cover criteria of 1926 Subpart M.

OSHA requirements are set by statute, standards and regulations. Our interpretation letters explain these requirements and how they apply to particular circumstances, but they cannot create additional employer obligations. This letter constitutes OSHA's interpretation of the requirements discussed. Note that our enforcement guidance may be affected by changes to OSHA rules. Also, from time to time we update our guidance in response to new information. To keep apprised of such developments, you can consult OSHA's website at https://www.osha.gov.