Identification, inspection, and marking of cranes when manufacturer-supplied identifications are unavailable.

OSHA requirements are set by statute, standards and regulations. Our interpretation letters explain these requirements and how they apply to particular circumstances, but they cannot create additional employer obligations. This letter constitutes OSHA's interpretation of the requirements discussed. Note that our enforcement guidance may be affected by changes to OSHA rules. Also, from time to time we update our guidance in response to new information. To keep apprised of such developments, you can consult OSHA's website at https://www.osha.gov.

February 23, 2004

Mr. Donald W Shelafo
International Union of Operating Engineers
P.O. BOX 40008
990 Kalamath Street
Denver, Colorado 80204-0008

Re: If the manufacturer's identification number tag is missing on a lattice boom section and that tag cannot be replaced, nor can the boom section's identity be confirmed, will the identification, inspection, and marking of the boom section by an independent inspector meet the requirements of §1926.550?

Dear Mr. Shelafo:

Requirements of 1926.404(b)(1) application to 208-volt branch circuits; electrical subcontractor requirements under 1926.404(b)(1) to monitor other on-site subcontractors.

OSHA requirements are set by statute, standards and regulations. Our interpretation letters explain these requirements and how they apply to particular circumstances, but they cannot create additional employer obligations. This letter constitutes OSHA's interpretation of the requirements discussed. Note that our enforcement guidance may be affected by changes to OSHA rules. Also, from time to time we update our guidance in response to new information. To keep apprised of such developments, you can consult OSHA's website at https://www.osha.gov.

February 7, 2005

Mr. Jeffrey P. Scarpello, Esq.
Executive Director
Penn-Del-Jersey Chapter
National Electrical Contractors Association
1500 Walnut Street
Suite 1630
Philadelphia, PA 19102

Re: Whether the requirements of §1926.404(b)(1) apply to 208-volt branch circuits; whether an electrical subcontractor is required under §1926.404(b)(1) to monitor other on-site subcontractors' compliance with that provision?

Dear Mr. Scarpello:

Training requirements for powder-actuated tools under §1926.302(e).

OSHA requirements are set by statute, standards and regulations. Our interpretation letters explain these requirements and how they apply to particular circumstances, but they cannot create additional employer obligations. This letter constitutes OSHA's interpretation of the requirements discussed. Note that our enforcement guidance may be affected by changes to OSHA rules. Also, from time to time we update our guidance in response to new information. To keep apprised of such developments, you can consult OSHA's website at https://www.osha.gov.

March 10, 2006

Bryan Page
Liberty Northwest
55 West 14th Street, Suite 202
Helena, MT 59601

Re: Training requirements for powder-actuated tools under §1926.302(e).

Dear Mr. Page:

This is in response to your letter dated October 3, 2005 to the Occupational Safety and Health Administration (OSHA). We apologize for the delay in providing this response.

We have paraphrased your question as follows:

Kiewit Power Constructors Co. et al. [Avalotis Corp., Bowen Engineering Corporation, Commonwealth Dynamics, Inc., Gibraltar Chimney International, LLC, Hamon Custodis, Inc., Hoffmann, Inc., International Chimney Corporation, Karrena International Chimney,

  • Publication Date:
  • Publication Type:
  • Fed Register #:
    78:60900-60918
  • Title:
    [Federal Register Volume 78, Number 191 (Wednesday, October 2, 2013)]
    [Notices]
    [Pages 60900-60918]
    From the Federal Register Online via the Government Printing Office [www.gpo.gov]
    [FR Doc No: 2013-23625]
    
    
    -----------------------------------------------------------------------
    
    DEPARTMENT OF LABOR
    
    Occupational Safety and Health Administration
    
    [Docket No. OSHA-2012-0015]
    
    
    Kiewit Power Constructors Co. et al.

Tully/OHL USA Joint Venture: Application for Permanent Variance and Interim Order; Grant of Interim Order; Request for Comments

  • Publication Date:
  • Publication Type:
  • Fed Register #:
    79:844-853
  • Title:
[Federal Register Volume 79, Number 4 (Tuesday, January 7, 2014)][Notices][Pages 844-853]
From the Federal Register Online via the Government Printing Office [www.gpo.gov]
[FR Doc No: 2014-00008]


-----------------------------------------------------------------------

DEPARTMENT OF LABOR

Occupational Safety and Health Administration

[Docket No.

Tully/OHL USA Joint Venture: Grant of a Permanent Variance

  • Publication Date:
  • Publication Type:
  • Fed Register #:
    79:29809-29819
  • Title:
[Federal Register Volume 79, Number 100 (Friday, May 23, 2014)][Notices][Pages 29809-29819]
From the Federal Register Online via the Government Printing Office [www.gpo.gov]
[FR Doc No: 2014-12016]


-----------------------------------------------------------------------

DEPARTMENT OF LABOR

Occupational Safety and Health Administration

[Docket No.

Traylor/Skanska/Jay Dee Joint Venture; Application for Permanent Variance and Interim Order; Grant of Interim Order; Request for Comments

  • Publication Date:
  • Publication Type:
  • Fed Register #:
    79:73631-73641
  • Title:
[Federal Register Volume 79, Number 238 (Thursday, December 11, 2014)][Notices][Pages 73631-73641]
From the Federal Register Online via the Government Printing Office [www.gpo.gov]
[FR Doc No: 2014-28994]


-----------------------------------------------------------------------

DEPARTMENT OF LABOR

Occupational Safety and Health Administration

[Docket No.

Impregilo Healy Parsons Joint Venture; Application for Permanent Variance and Interim Order; Grant of Interim Order; Request for Comments

  • Publication Date:
  • Publication Type:
  • Fed Register #:
    80:7636-7646
  • Title:
[Federal Register Volume 80, Number 28 (Wednesday, February 11, 2015)][Notices]
[Pages 7636-7646]
From the Federal Register Online via the Government Printing Office [www.gpo.gov]
[FR Doc No: 2015-02836]


-----------------------------------------------------------------------

DEPARTMENT OF LABOR

Occupational Safety and Health Administration

[Docket No.