Cancellation of CPL 03-00-007, National Emphasis Program - Crystalline Silica

  • Record Type:
  • Current Directive Number:
  • Old Directive Number:
  • Title:
  • Information Date:
Archive Notice - OSHA Archive

NOTICE: This is an OSHA Archive Document, and may no longer represent OSHA Policy. It is presented here as historical content, for research and review purposes only.

OSHA NOTICE

DIRECTIVE NUMBER: CPL 03-00-007 EFFECTIVE DATE: October 26, 2017
SUBJECT: Cancellation of CPL 03-00-007, National Emphasis Program - Crystalline Silica

ABSTRACT

Purpose:
This Notice cancels OSHA Instruction CPL 03-00-007, National Emphasis P

Regional Ergonomics Program

  • Record Type:
  • Current Directive Number:
  • Old Directive Number:
  • Title:
  • Information Date:
Archive Notice - OSHA Archive

NOTICE: This is an OSHA Archive Document, and may no longer represent OSHA Policy. It is presented here as historical content, for research and review purposes only.

"This document was published prior to the publication of OSHA's final rule on Ergonomics Program (29 CFR 1910.900, November 14, 2000), and therefore does not necessarily address or reflect the provisions set forth in the final standard."

OSHA Instruction CPL 2.78 FEB 9 1987 Directorate of Technical Support

SUBJECT: Regional Ergonomics Program

Inspection Guidelines for Post-Emergency Response Operations Under CFR 1910.120

  • Record Type:
  • Current Directive Number:
  • Old Directive Number:
  • Title:
  • Information Date:

OSHA Instruction CPL 2-2.51 November 5, 1990 Directorate of Compliance Programs

Subject: Inspection Guidelines for Post-Emergency Response Operations Under 29 CFR 1910.120

A. Purpose. This instruction provides procedures for ensuring uniform enforcement of training under the Hazardous Waste Operations and Emergency Response standard for employees involved in post-emergency response operations.

B. Scope. This instruction applies OSHA-wide.

C. References.

29 CFR 1910.95(b)(1), Guidelines for Noise Enforcement; Appendix A

  • Record Type:
  • Current Directive Number:
  • Old Directive Number:
  • Title:
  • Information Date:

NOTE: Although the first three (3) pages of this OSHA Instruction CPL 2-2.35A have been cancelled, Appendix A is still vaild.

 

Appendix A

 

Noise Control Guidelines

When comparing the relative degree of attenuation of personal protectors and engineering and/or administrative controls, all of the following factors in addition to the guidelines in the Field Operations Manual and Industrial Hygiene Field Operations Manual must be considered and documented in the case file:

29 CFR 1910.1018 Inspection and Compliance Procedures for the Permanent Occupation Exposure Standard for Inorganic Arsenic Compounds.

  • Record Type:
  • Current Directive Number:
  • Old Directive Number:
  • Title:
  • Information Date:

OSHA Instruction CPL 2-2.22 October 10, 1978 OSHA PROGRAM DIRECTIVE

TO: REGIONAL ADMINISTRATORS/OSHA

THRU: DONALD E. MACKENZIE Field Coordinator

SUBJECT: 29 CFR 1910.1018, Inspection and Compliance Procedures For the Permanent Occupational Exposure Standard For Inorganic Arsenic Compounds

1. Purpose

Brass and Bronze Ingot Manufacturing Industry Compliance Requirements and Dates Under the Lead Standard (29 CFR 1910.1025).

  • Record Type:
  • Current Directive Number:
  • Old Directive Number:
  • Title:
  • Information Date:

OSHA Instruction CPL 2-2.67 February 27, 1997 Directorate of Compliance Programs

Subject: Brass and Bronze Ingot Manufacturing Industry Compliance Requirements and Dates Under the Lead Standard (29 CFR 1910.1025).

A. Purpose. This instruction changes compliance requirements and compliance dates for enforcement of the engineering and work practice controls provisions of the Lead Standard (29 CFR 1910.1025(e)(1)) in the brass and bronze ingot manufacturing industry.

Inorganic Mercury and its Compounds

  • Record Type:
  • Current Directive Number:
  • Old Directive Number:
  • Title:
  • Information Date:

CPL 2-2.6 OSHA Instruction October 30, 1978

OSHA PROGRAM DIRECTIVE #300-2

TO: Field and National Offices/OSH

SUBJECT: Inorganic Mercury and Its Compounds

1. PURPOSE

This directive provides guidelines to be followed in inspection, and where necessary, the issuance of citations, regarding exposure to mercury in the workplace.

2. DOCUMENTATION AFFECTED

None

3. DOCUMENTATION REFERENCED

Cotton Dust Manual

  • Record Type:
  • Current Directive Number:
  • Old Directive Number:
  • Title:
  • Information Date:

OSHA Instruction CPL 2-2.31
January 16, 1981
Office of Compliance Programming

Subject:   Cotton Dust Manual

  1. Purpose. This instruction provides guidelines for using the Cotton Dust Manual.

  2. Scope. This instruction applies OSHA-wide.

  3. References.

    1. Industrial Hygiene Field Operations Manual (IHFOM).

    2. Field Operations Manual (FOM).

Benzidine - Based Dyes: Direct Black 38, Direct Brown 95 and Direct Blue 6 Dyes

  • Record Type:
  • Current Directive Number:
  • Old Directive Number:
  • Title:
  • Information Date:

OSHA Instruction CPL 2-2.27 FEB 22, 1980 Office of Compliance Programming

Subject: Benzidine-Based Dyes: Direct Black 38, Direct Brown 95 and Direct Blue 6 Dyes

A. Purpose. This instruction provides guidelines to follow when issuing citations under Section 5(a)(1) of the Act, and pertinent standards of a general nature, for employee exposure to Direct Black 38, Direct Brown 95 and Direct Blue 6 benzidine-based dyes.

B. Scope. This instruction applies OSHA-wide.

C. Action. OSHA Regional Administrators/Area Directors shall assure that: