US Dept of Labor

Occupational Safety & Health AdministrationWe Can Help

Standard Interpretations - Table of Contents
• Standard Number: 1910.1030

January 21, 1998

Wilson Sonsini Goodrich Rosati
Professional Corporation
Attention: David M Hoffmeister
650 Page Mill Road
Palo Alto, California 94304-1050

Dear Mr Hoffmeister:

This is in response to your letter dated October 20, 1997. In your letter you have provided information on the NiC1800 Needle Disposal System. This is a needle destruction device that destroys needles by incineration. You have requested that the Occupational Safety and Health Administration (OSHA) provide written communication that this product, when used according to instructions, is not in violation with OSHA's Bloodborne Pathogens standard, 29 CFR 1910.1030.

This needle removal system was not available at the time the standard was written. The incineration of needles is not prohibited by the Bloodborne Pathogens standard. Since the standard became final there has been a great surge in the production of medical devices. The Federal Food and Drug Administration approves these devices for marketing, and once the approval is obtained, these devices can be used in the workplace. Your letter indicates that the NiC1800 Needle Disposal System has been approved for marketing. OSHA cannot and does not endorse, review, or approve of medical devices. The real test of compliance with OSHA standards comes about by observation in the workplace, where the medical devices are in use. Medical devices generally have specific instructions that must be followed when using them. The safety features that they provide may become more of a hazard if the employee is not using the device correctly. Compliance with the OSHA standard can only be determined on a case by case basis.

Thank you for your interest in occupational safety and health hope this provides an answer to all your questions. If you have further questions, please feel free to call Wanda Bissell of my staff at (202) 219-8036 Ext.41.


John B. Miles Jr.
Directorate of Compliance Programs

Standard Interpretations - Table of Contents

Thank You for Visiting Our Website

You are exiting the Department of Labor's Web server.

The Department of Labor does not endorse, takes no responsibility for, and exercises no control over the linked organization or its views, or contents, nor does it vouch for the accuracy or accessibility of the information contained on the destination server. The Department of Labor also cannot authorize the use of copyrighted materials contained in linked Web sites. Users must request such authorization from the sponsor of the linked Web site. Thank you for visiting our site. Please click the button below to continue.