TranslateViolation Detail
Standard Cited:5A0001 OSH Act General Duty Paragraph
| Violation Items | |||||
|---|---|---|---|---|---|
| Nr: 998534.015 | Citation: 01001 | Issuance: 02/06/2015 | ReportingID: 0729300 | ||
| Viol Type: | Serious | NrInstances: | 2 | Contest Date: | |
| Abatement Date: | 03/26/2015 2 | Nr Exposed: | 2 | Final Order: | 02/24/2015 |
| Initial Penalty: | $5,000.00 | REC: | Emphasis: | ||
| Current Penalty: | $2,975.00 | Gravity: | 05 | Haz Category: | |
| Penalty and Failure to Abate Event History | |||||||
|---|---|---|---|---|---|---|---|
| Type | Event | Date | Penalty | Abatement | Type | FTA Insp | |
| Penalty | Z: Issued | 02/06/2015 | $5,000.00 | 03/26/2015 | Serious | ||
| Penalty | I: Informal Settlement | 02/24/2015 | $2,975.00 | 03/26/2015 | Serious | ||
Text For Citation: 01 Item/Group: 001 Hazard:
OSH ACT of 1970 Section (5)(a)(1): Section 5(a)(1) of the Occupational Safety and Health Act of 1970: The employer did not furnish employment and a place of employment which were free from recognized hazards that were causing or likely to cause death or serious physical harm to employee(s) in that employee(s) were exposed to the hazard of being struck-by: a/ Inside of the Painting Department, employee(s) were exposed to a struck-by hazard due to a possible unplanned collapse of two metal, shelving units, each three tiers high, that were not anchored. One method of abatement to correct this apparent hazard is to bolt or otherwise secure both shelving units to the concrete floor as required by ANSI MH16.1-2012, paragraph 1.4.7. DISCLAIMER: a/ The employer is not limited to the abatement method(s) suggested by OSHA. b/ The employer is responsible for selecting and implementing an effective abatement method.