Violation Detail
Standard Cited: 19260451 D12 IV General requirements.
Inspection Nr: 998264.015
Citation: 01004B
Citation Type: Serious
Abatement Date: 04/13/2015 2
Initial Penalty: $0.00
Current Penalty: $0.00
Issuance Date: 03/25/2015
Nr Instances: 1
Nr Exposed: 2
Related Event Code (REC): C
Gravity: 10
Report ID: 0418800
Contest Date:
Final Order: 04/15/2015
Emphasis:
Type | Latest Event | Event Date | Penalty | Abatement Due Date | Citation Type | Failure to Abate Inspection |
---|---|---|---|---|---|---|
Penalty | I: Informal Settlement | 04/15/2015 | $0.00 | 04/13/2015 | Serious | |
Penalty | Z: Issued | 03/25/2015 | $0.00 | 04/13/2015 | Serious |
Text For Citation: 01 Item/Group: 004B Hazard:
29 CFR 1926.451(d)(12)(iv): Clips were not be inspected and retightened to the manufacturer's recommendations at the start of each workshift thereafter: On or about October 2, 2014, at the above addressed jobsite, employees were exposed to a fall hazard of approximately 200 feet from the 20th floor of a residential apartment complex under renovation while performing concrete chipping work from a two (2) point suspension scaffold which measured approximately 16 feet in length and 28 inches in width and did not have two (2) wire clips inspected and tightened with a torque wrench for a period of at least one (1) week.