Violation Detail
Standard Cited: 19100219 C04 I Mechanical power-transmission apparatus.
Inspection Nr: 997297.015
Citation: 01005
Citation Type: Serious
Abatement Date: 03/27/2015 2
Initial Penalty: $4,400.00
Current Penalty: $2,200.00
Issuance Date: 02/20/2015
Nr Instances: 2
Nr Exposed: 8
Related Event Code (REC):
Gravity: 5
Report ID: 0522500
Contest Date:
Final Order: 03/11/2015
Emphasis:
Type | Latest Event | Event Date | Penalty | Abatement Due Date | Citation Type | Failure to Abate Inspection |
---|---|---|---|---|---|---|
Penalty | I: Informal Settlement | 03/11/2015 | $2,200.00 | 03/27/2015 | Serious | |
Penalty | Z: Issued | 02/20/2015 | $4,400.00 | 03/27/2015 | Serious |
Text For Citation: 01 Item/Group: 005 Hazard:
29 CFR 1910.219(c)(4)(i): Projecting shaft ends shall present a smooth edge and end and shall not project more than one-half the diameter of the shaft unless guarded by nonrotating caps or safety sleeves. a. At the workplace located at 720 Marion Rd., Columbus, Ohio, the Engel machine, model s-5581-02-0, on the North side of the machine, had 48 shafts ends that were not guarded thereby exposing employees to a caught-in hazard. The diameter of the shaft ends were approximately 2 inches and protruded approximately 4 inches from the equipment. The shaft ends were approximately 34 inches from the floor. a. At the workplace located at 720 Marion Rd., Columbus, Ohio, the Engel machine, model s-5581-02-0, on the South side of the machine, had 48 shafts ends that were not guarded thereby exposing employees to a caught-in hazard. The diameter of the shaft ends were approximately 2 inches and protruded approximately 4 inches from the equipment. The shaft ends were approximately 34 inches from the floor.