Violation Detail
Standard Cited: 19100219 C02 I Mechanical power-transmission apparatus.
Inspection Nr: 997297.015
Citation: 01004
Citation Type: Serious
Abatement Date: 03/27/2015 2
Initial Penalty: $5,500.00
Current Penalty: $2,750.00
Issuance Date: 02/20/2015
Nr Instances: 2
Nr Exposed: 8
Related Event Code (REC):
Gravity: 5
Report ID: 0522500
Contest Date:
Final Order: 03/11/2015
Emphasis:
Type | Latest Event | Event Date | Penalty | Abatement Due Date | Citation Type | Failure to Abate Inspection |
---|---|---|---|---|---|---|
Penalty | I: Informal Settlement | 03/11/2015 | $2,750.00 | 03/27/2015 | Serious | |
Penalty | Z: Issued | 02/20/2015 | $5,500.00 | 03/27/2015 | Serious |
Text For Citation: 01 Item/Group: 004 Hazard:
29 CFR 1910.219(c)(2)(i): All exposed parts of horizontal shafting seven (7) feet or less from floor or working platform, excepting runways used exclusively for oiling, or running adjustments, shall be protected by a stationary casing enclosing shafting completely or by a trough enclosing sides and top or sides and bottom of shafting as location requires. a. At the workplace located at 720 Marion Rd., Columbus, Ohio, the Engel machine, model s-5581-02-0, on the South side of the machine, two shafts were not guarded thereby exposing employees to a caught-in hazard. The shafts were approximately 30 inches from the floor. b. At the workplace located at 720 Marion Rd., Columbus, Ohio, on the output conveyor of the Engel machine, model s-5581-02-0, on the South side of the conveyor, a shaft was not guarded thereby exposing employees to a caught-in hazard. The shaft was approximately 34 inches from the floor.