Powered by GoogleTranslate

Occupational Safety and Health Administration OSHA

Alert: Due to routine maintenance on the OSHA website, some pages may be temporarily unavailable.
To report an emergency, file a complaint with OSHA or ask a safety and health question, call 1-800-321-6742 (OSHA).

Violation Detail

Standard Cited:5A0001 OSH Act General Duty Paragraph

This violation item has been deleted.

Violation Items

Nr: 958074.015 Citation: 01001 Issuance: 05/13/2014 ReportingID: 0418100

Viol Type:Serious NrInstances:1 Contest Date:
Abatement Date:06/09/2014 Nr Exposed:4 Final Order:06/30/2014
Initial Penalty: $2,475.00 REC: Emphasis:
Current Penalty: $2,475.00 Gravity:1 Haz Category:

Penalty and Failure to Abate Event History
Type Event Date Penalty Abatement Type FTA Insp
Penalty Z: Issued 05/13/2014 $2,475.00 06/09/2014 Serious  
Penalty I: Informal Settlement 06/30/2014 $2,475.00 06/09/2014 Serious  

Text For Citation: 01 Item/Group: 001 Hazard:

OSH ACT of 1970 Section (5)(a)(1): The employer did not furnish employment and a place of employment which were free from recognized hazards that were causing or likely to cause death or serious physical harm to employees: On or about February 6, 2014, employees were exposed to struck-by hazards while performing work around damaged racks. The employer failed to unload, replace or repair damaged racks. The following racks were damaged: a. Racks along the main aisle in the shipping department. AMONG OTHER METHODS, ONE FEASIBLE AND ACCEPTABLE ABATEMENT METHOD TO CORRECT THESE HAZARDS IS: To follow American National Standard Institute (ANSI) MH16.1:2012, Specification for the Design, Testing, and Utilization of Industrial Storage Racks, Section 1.4.9, which states, "Upon any visible damage, the pertinent portions of the rack shall be immediately isolated by the user until the damaged portion is evaluated by a storage rack design professional. Before allowing the rack to be placed back into service the design professional must certify that the rack system and/or the repaired components have been restored to at least their original design capacity.

Thank You for Visiting Our Website

You are exiting the Department of Labor's Web server.

The Department of Labor does not endorse, takes no responsibility for, and exercises no control over the linked organization or its views, or contents, nor does it vouch for the accuracy or accessibility of the information contained on the destination server. The Department of Labor also cannot authorize the use of copyrighted materials contained in linked Web sites. Users must request such authorization from the sponsor of the linked Web site. Thank you for visiting our site. Please click the button below to continue.