Translate
Violation Detail
Standard Cited: 19100333 A Selection and use of work practices
This violation item has been deleted.
Inspection Nr: 930523.015
Citation: 01001
Citation Type: Serious
Abatement Date: 02/05/2014
Initial Penalty: $7,000.00
Current Penalty: $0.00
Issuance Date: 01/09/2014
Nr Instances: 1
Nr Exposed: 1
Related Event Code (REC):
Gravity: 10
Report ID: 0420600
Contest Date:
Final Order: 02/04/2014
Emphasis:
| Type | Latest Event | Event Date | Penalty | Abatement Due Date | Citation Type | Failure to Abate Inspection |
|---|---|---|---|---|---|---|
| Penalty | I: Informal Settlement | 02/04/2014 | $0.00 | 02/05/2014 | Serious | |
| Penalty | Z: Issued | 01/09/2014 | $7,000.00 | 02/05/2014 | Serious |
Text For Citation: 01 Item/Group: 001 Hazard:
29 CFR 1910.333(a): Safety-related work practices were not employed to prevent electric shock or other injuries resulting from either direct or indirect electrical contacts, when work was performed near or on equipment or circuits which were or could be energized. The specific safety-related work practices shall be consistent with the nature and extent of the assoicated electrical hazards: (a) In the MCC (Motor Control Center) Switch Gear Room where work was performed, safety-related work practices were not outlined or identified to be used for employees working on equipment or circuits which were energized causing Arc-Flash injuries as observed on or about August 16, 2013.