Violation Detail
Standard Cited: 19100134 F Respiratory Protection.
Inspection Nr: 895166.015
Citation: 01001B
Citation Type: Serious
Abatement Date: 06/20/2013 2
Initial Penalty: $0.00
Current Penalty: $0.00
Issuance Date: 05/24/2013
Nr Instances: 10
Nr Exposed: 10
Related Event Code (REC):
Gravity: 5
Report ID: 0419400
Contest Date:
Final Order: 06/19/2013
Emphasis:
Type | Latest Event | Event Date | Penalty | Abatement Due Date | Citation Type | Failure to Abate Inspection |
---|---|---|---|---|---|---|
Penalty | I: Informal Settlement | 06/19/2013 | $0.00 | 06/20/2013 | Serious | |
Penalty | Z: Issued | 05/24/2013 | $0.00 | 06/20/2013 | Serious |
Text For Citation: 01 Item/Group: 001B Hazard:
29 CFR 1910.134(f): Fit testing. This paragraph requires that, before an employee may be required to use any respirator with a negative or positive pressure tight-fitting facepiece, the employee must be fit tested with the same make, model, style, and size of respirator that will be used. This paragraph specifies the kinds of fit tests allowed, the procedures for conducting them, and how the results of the fit tests must be used. a) On or about March 27, 2013 employees working in the Welding, Metal Finishing, Paint and Canophy area that are required to wear the 3-M N-95 NIOSH respirator a tight fitting facepiece have not been fit tested.