Violation Detail
Standard Cited: 19100333 A Selection and use of work practices
This violation item has been deleted.
Inspection Nr: 619418.015
Citation: 02006
Citation Type: Repeat
Abatement Date: 03/28/2013
Initial Penalty: $38,500.00
Current Penalty: $0.00
Issuance Date: 03/04/2013
Nr Instances: 1
Nr Exposed: 1
Related Event Code (REC):
Gravity: 10
Report ID: 0522500
Contest Date: 03/13/2013
Final Order: 08/15/2014
Emphasis:
Type | Latest Event | Event Date | Penalty | Abatement Due Date | Citation Type | Failure to Abate Inspection |
---|---|---|---|---|---|---|
Penalty | F: Formal Settlement | 08/15/2014 | $0.00 | 03/28/2013 | Repeat | |
Penalty | C: Contested | 11/26/2013 | $38,500.00 | 03/28/2013 | Repeat | |
Penalty | Z: Issued | 03/04/2013 | $38,500.00 | 03/28/2013 | Repeat |
Text For Citation: 02 Item/Group: 006 Hazard:
29 CFR 1910.333(a): "General." Safety-related work practices shall be employed to prevent electric shock or other injuries resulting from either direct or indirect electrical contacts, when work is performed near or on equipment or circuits which are or may be energized. The specific safety-related work practices shall be consistent with the nature and extent of the associated electrical hazards: a. At the South casting line, an employee performed work on 110 volt electrical wiring into a control box that was still live, thereby exposing the employee to electrical shock hazards. Mahle Engine Components USA, Inc. was previously cited for a violation of this occupational safety and health standard or its equivalent standard 1910.333(a), which was contained in OSHA inspection number 313150401, citation number 1, item number 8 and was affirmed as a final order on July 12, 2010, with respect to a workplace located at 5130 North State Route 60, NW McConnelsville, OH 43756.