TranslateViolation Detail
Standard Cited: 5A0001 OSH Act General Duty Paragraph
This violation item has been deleted.
| Violation Items | |||||
|---|---|---|---|---|---|
| Nr: 314770439 | Citation: 01001 | Issuance: 08/02/2011 | ReportingID: 0625700 | ||
| Viol Type: | Serious | NrInstances: | 1 | Contest Date: | 08/16/2011 |
| Abatement Date: | 08/12/2011 | Nr Exposed: | 1 | Final Order: | 06/26/2012 |
| Initial Penalty: | $7,000.00 | REC: | A | Emphasis: | |
| Current Penalty: | $0.00 | Gravity: | 10 | Haz Category: | UNCLASS |
| Penalty and Failure to Abate Event History | |||||||
|---|---|---|---|---|---|---|---|
| Type | Event | Date | Penalty | Abatement | Type | FTA Insp | |
| Penalty | Z: Issued | 08/02/2011 | $7,000.00 | 08/12/2011 | Serious | ||
| Penalty | F: Formal Settlement | 06/26/2012 | $0.00 | 08/12/2011 | Serious | ||
Text For Citation: 01 Item/Group: 001 Hazard: UNCLASS
Section 5(a)(1) of the Occupational Safety and Health Act of 1970: The employer did not furnish to each of his employees a place of employment which was free fr om the rollover hazard of operating an aerial lift that did not have a pre-start inspection performed and on a slope outside the manufacturers maximum slope rat ing: This violation occurred on or about April 28, 2011, where an employee was e xposed to a rollover hazard while operating an aerial lift that had not been pre - start inspected on a slope outside the manufacturers maximum slope rating. ABA TEMENT NOTE: Among other methods, feasible and acceptable abatement methods to c orrect these hazards would be to 1. Inspect the workplace for possible hazards s uch as drop-offs and slopes according to ANSI/SIA A92.6 and/or the Genie operato r's manual. 2. Perform pre- start inspections before use each day according to t he ANSI/SIA A92.6 and/or the Genie operator's manual.