Violation Detail
Standard Cited: 19100119 L04 Process safety management of highly hazardous chemicals.
This violation item has been deleted.
Inspection Nr: 312922966
Citation: 01017
Citation Type: Serious
Abatement Date: 02/14/2011
Initial Penalty: $4,500.00
Current Penalty:
Issuance Date: 12/29/2010
Nr Instances: 4
Nr Exposed: 71
Related Event Code (REC):
Gravity: 10
Report ID: 0626700
Contest Date: 01/21/2011
Final Order: 01/09/2013
Emphasis:
Type | Latest Event | Event Date | Penalty | Abatement Due Date | Citation Type | Failure to Abate Inspection |
---|---|---|---|---|---|---|
Penalty | J: ALJ Decision | 01/09/2013 | 02/14/2011 | Serious | ||
Penalty | Z: Issued | 12/29/2010 | $4,500.00 | 02/14/2011 | Serious |
Text For Citation: 01 Item/Group: 017 Hazard: REFINERY
29 CFR 1910.119(l)(4): A change covered by 29 CFR 1910.119(l) resulted in a change in the process safety information required by 29 CFR 1910.119(d) and the process information was not updated: a)The employer did not ensure that a change covered by 29 CFR 1910.119(l) resulted in a change in the process safety information required by 29 CFR 1910.119(d) and the process information was not updated. This violation most recently occurred at the Pasadena Refining Systems Inc. located 111 Red Bluff Road, Pasadena, Texas on or about June 30, 2010, and at times thereafter, in the Alky 1&2 and the FCC Units where the Process Safety Information (i.e. Piping and Instrument Diagram (P&ID)) and MOC # 2009-71-44 resulted in a significant change and was not updated, exposing employees to potential fire and explosion hazards. b)The employer did not ensure that a change covered by 29 CFR 1910.119(l) resulted in a change in the process safety information required by 29 CFR 1910.119(d) and the process information was not updated. This violation most recently observed at the Pasadena Refining Systems Inc. located at 111 Red Bluff Road, Pasadena, Texas on or about September 13, 2010, and at times thereafter, in the Alky 1&2 and the FCC units where the Process Safety Information (i.e. Piping and Instrument Diagram (P&ID)) when #2009-71-50 resulted in a significant change and was not updated, exposing employees to potential fire and explosion hazards. c)The employer did not ensure that a change covered by 29 CFR 1910.119(l) resulted in a change in the process safety information required by 29 CFR 1910.119(d) and the process information was not updated. This violation most recently observed at the Pasadena Refining Systems Inc. located at 111 Red Bluff Road, Pasadena, Texas on or about September 14, 2010, and at times thereafter, in the Alky 1&2 and the FCC units where Process Safety Information (i.e. Piping and Instrument Diagram (P&ID)) when MOC #10-55-009 resulted in a significant change and was not updated, exposing employees to potential fire and explosion hazards d)The employer did not ensure that a change covered by 29 CFR 1910.119(l) resulted in a change in the process safety information required by 29 CFR 1910.119(d) and the process information was not updated. This violation most recently observed at the Pasadena Refining Systems Inc. located at 111 Red Bluff Road, Pasadena, Texas on or about September 13, 2010, and at times thereafter, in the Alky 1&2 and the FCC units where Process Safety Information (i.e. Piping and Instrument Diagram (P&ID)) when MOC #2009-72-24 resulted in a significant change and was not updated, exposing employees to potential fire and explosion hazards. Pursuant to 29 C.F.R. 1903.19, within ten (10) calendar days of the abatement date of this citation, the employer must submit documentation showing that it is in compliance with the standard, including describing the steps that it is taking to ensure that a change covered by 29 CFR 1910.119(l) resulted in a change in the process safety information required by 29 CFR 1910.119(d) and the process information was not updated.