TranslateViolation Detail
Standard Cited: 5A0001 OSH Act General Duty Paragraph
| Violation Items | |||||
|---|---|---|---|---|---|
| Nr: 310468152 | Citation: 01001 | Issuance: 01/03/2008 | ReportingID: 0830500 | ||
| Viol Type: | Serious | NrInstances: | 1 | Contest Date: | |
| Abatement Date: | 01/30/2008 X | Nr Exposed: | 5 | Final Order: | |
| Initial Penalty: | $3,500.00 | REC: | Emphasis: | ||
| Current Penalty: | $2,100.00 | Gravity: | 10 | Haz Category: | STRUCK BY |
| Penalty and Failure to Abate Event History | |||||||
|---|---|---|---|---|---|---|---|
| Type | Event | Date | Penalty | Abatement | Type | FTA Insp | |
| Penalty | Z: Issued | 01/03/2008 | $3,500.00 | 01/30/2008 | Serious | ||
| Penalty | I: Informal Settlement | 01/24/2008 | $2,100.00 | 01/30/2008 | Serious | ||
Text For Citation: 01 Item/Group: 001 Hazard: STRUCK BY
Section 5(a)(1) of the Occupational Safety and Health Act of 1970: The employer did not furnish employment and a place of employment which were free from recognized hazards that were causing or likely to cause death or serious physical harm to employees in that employees were exposed to struck-by hazards due to failure of running wire rope within the air tugger: (a)All Star Enterprises, Inc. dba Bernard Well Service & Rig # 3 County Rd 352, Rifle, CO 81650: On or before July 19, 2007, the casing contractor did not ensure that frequent and periodic inspections were performed for the wire rope used to transfer casing pipe from the laydown machine to the rig floor. The casing contractor did not have sufficient procedures and controls implemented to effectively ensure running rope and trough equipment used to transfer joints of casing pipe, was inspected frequently and periodically to determine if wire rope was sufficient for use. The wire rope used had multiple breaks within a lay identified through the entire rope being used. The condition exposed employees working on the derrick floor and on the lay down machine to struck-by hazards as a result of the wire rope failing. Abatement Note: Among other methods, one feasible and acceptable method to correct this hazard can be found in the American National Standards Institute B.30.7-2001 Section 7- 2.1,7-2.1.2, 7-2.1.4, and 7-2.4, which provides for frequent and periodic inspections and the recordkeeping associated with such inspections. Abatement Note: Abatement certification and documentation are required for this item (see enclosed "Sample Abatement Certification Letter").