TranslateViolation Detail
Standard Cited: 5A0001 OSH Act General Duty Paragraph
| Violation Items | |||||
|---|---|---|---|---|---|
| Nr: 306722364 | Citation: 01002 | Issuance: 12/04/2003 | ReportingID: 0521400 | ||
| Viol Type: | Serious | NrInstances: | 2 | Contest Date: | |
| Abatement Date: | 03/22/2004 X | Nr Exposed: | 2 | Final Order: | |
| Initial Penalty: | $3,500.00 | REC: | Emphasis: | ||
| Current Penalty: | $1,750.00 | Gravity: | 10 | Haz Category: | GUARDING |
| Penalty and Failure to Abate Event History | |||||||
|---|---|---|---|---|---|---|---|
| Type | Event | Date | Penalty | Abatement | Type | FTA Insp | |
| Penalty | Z: Issued | 12/04/2003 | $3,500.00 | 12/22/2003 | Serious | ||
| Penalty | I: Informal Settlement | 12/23/2003 | $1,750.00 | 03/22/2004 | Serious | ||
Text For Citation: 01 Item/Group: 002 Hazard: GUARDING
Public Law 91-596 Section 5(a)(1) of the Occupational Safety and Health Act of 1970: Each employer shall furnish to each of his employees employment and a place of employment which are free from recognized hazards that are causing or are likely to cause death or serious physical harm to employees that are exposed to point of operation injuries on hydraulic trim presses. Rockford, Il. Jobsite Instance A: The safety device for hydraulic trim press No. 6 did not provide adequate point of operation guarding. Instance B: Hydraulic trim press No. 7 was not equipped with barrier guards. A feasible and acceptable means of abatement is to follow the guidelines established in ANSI B11.2-1982 5.1 - Safety Requirements for Construction Care and Use of Hydraulic Presses. CERTIFICATION REQUIRED FOR THESE ITEMS.