Violation Detail
Standard Cited: 5A0001 OSH Act General Duty Paragraph
Inspection Nr: 305104200
Citation: 01001
Citation Type: Serious
Abatement Date: 12/06/2002 X
Initial Penalty: $4,500.00
Current Penalty: $900.00
Issuance Date: 12/02/2002
Nr Instances: 1
Nr Exposed: 4
Related Event Code (REC): A
Gravity: 10
Report ID: 0317500
Contest Date: 01/22/2003
Final Order: 12/03/2003
Emphasis:
Type | Latest Event | Event Date | Penalty | Abatement Due Date | Citation Type | Failure to Abate Inspection |
---|---|---|---|---|---|---|
Penalty | J: ALJ Decision | 12/03/2003 | $900.00 | 12/06/2002 | Serious | |
Penalty | Z: Issued | 12/02/2002 | $4,500.00 | 12/06/2002 | Serious |
Text For Citation: 01 Item/Group: 001 Hazard: CRUSHING
Section 5(a)(1) of the Occupational Safety and Health Act of 1970: The employer did not furnish employment and a place of employment which were free from recognized hazards that were causing or likely to cause death or serious physical harm to employees in that employees were exposed to crushing injuries: (a) Farmington, PA, 1001 Lafayette Drive, ski slope; The operator's manual for the utility cart manufactured by Club Car Inc., Carryall-1, serial number FG9534454874 was not used to develop standard operating procedures and for worker training in the safe operation of the utility vehicle nor was a preventative maintenance program developed as evidenced by a broken headlight, worn tires, and missing operating instruction signs from the steering column. Among other methods, one feasible and acceptable abatement method to correct this hazard is to develop an operator's training program and a preventative maintenance program as outlined by the manufacturer's operating manual.