Powered by GoogleTranslate

Occupational Safety and Health Administration OSHA

Violation Detail

Standard Cited: 5A0001 OSH Act General Duty Paragraph

Violation Items

Nr: 300055084 Citation: 01001 Issuance: 10/13/1999 ReportingID: 0728900

Viol Type:Other NrInstances:1 Contest Date:
Abatement Date:10/26/1999 X Nr Exposed:1 Final Order:
Initial Penalty: $1,400.00 REC: Emphasis:
Current Penalty: Gravity:02 Haz Category:ELECTRIC

Penalty and Failure to Abate Event History
Type Event Date Penalty Abatement Type FTA Insp
Penalty Z: Issued 10/13/1999 $1,400.00 10/26/1999 Serious  
Penalty I: Informal Settlement 11/03/1999 10/26/1999 Other  

Text For Citation: 01 Item/Group: 001 Hazard: ELECTRIC

Section 5(a)(1) of the Occupational Safety and Health Act of 1970: The employer did not furnish employment and a place of employment which were free from recognized hazards that were causing or likely to cause death or serious physical harm to employees in that employees were exposed to the recognized fire and explosion hazards associated with an improperly equipped and operated spray booth. Employees at the feed yard are exposed to fires and burns due to electrical equipment, which is not approved for flammable vapor environments, being used in the spray booth and due to combustible material being stored in the booth. Two halogen lights and a drill, which were not approved for the hazardous location, were stored and used in the spray booth. Combustible materials such as lumber and boxes were being stored in the spray booth. "NO SMOKING" signs were not posted in the area. Among other methods, feasible and acceptable abatement methods to correct this hazard include, but are not limited to the following: a)Install correct portable lighting and electrical equipment or remove the portable lights and drill from the spray booth in accordance with National Fire Protection Association (NFPA) 33 - 1995. b)Remove the combustible material from the spray booth in accordance with NFPA 33 - 1995. c)Post "NO SMOKING" signs in accordance with NFPA 33 - 1995. Abatement certification is required for this violation. The abatement certification sheet is enclosed with the citations.ion

Thank You for Visiting Our Website

You are exiting the Department of Labor's Web server.

The Department of Labor does not endorse, takes no responsibility for, and exercises no control over the linked organization or its views, or contents, nor does it vouch for the accuracy or accessibility of the information contained on the destination server. The Department of Labor also cannot authorize the use of copyrighted materials contained in linked Web sites. Users must request such authorization from the sponsor of the linked Web site. Thank you for visiting our site. Please click the button below to continue.