Translate
Violation Detail
Standard Cited: 19100212 A01 General requirements for all machines.
This violation item has been deleted.
Inspection Nr: 1529075.015
Citation: 02008
Citation Type: Willful
Abatement Date: 10/22/2021
Initial Penalty: $136,532.00
Current Penalty: $0.00
Issuance Date: 09/27/2021
Nr Instances: 6
Nr Exposed: 9
Related Event Code (REC):
Gravity: 10
Report ID: 0522300
Contest Date: 10/06/2021
Final Order: 03/27/2023
Emphasis:
| Type | Latest Event | Event Date | Penalty | Abatement Due Date | Citation Type | Failure to Abate Inspection |
|---|---|---|---|---|---|---|
| Penalty | F: Formal Settlement | 03/27/2023 | $0.00 | 10/22/2021 | Willful | |
| Penalty | C: Contested | 10/06/2021 | $136,532.00 | 10/22/2021 | Willful | |
| Penalty | Z: Issued | 09/27/2021 | $136,532.00 | 10/22/2021 | Willful |
Text For Citation: 02 Item/Group: 008 Hazard:
29 CFR 1910.212(a)(1):One or more methods of machine guarding was not provided to protect the operator and other employees in the machine area from hazards such as those created by point of operation, ingoing nip points, rotating parts, flying chips and sparks. a. The employer is failing to protect operators from pinch point hazards on the #3143 core machine and associated picker table located in the Core Department while performing various tasks including, but not limited to, monitoring the operation of core machine 3143, cleaning between cycles, and removing cores from the picker table. This was most recently documented on May 6, 2021 at the General Aluminum Mfg. Company facility located in Rootstown Township, Ohio.