Translate
Violation Detail
Standard Cited: 19100212 A03 II General requirements for all machines.
This violation item has been deleted.
Inspection Nr: 1529075.015
Citation: 02004B
Citation Type: Willful
Abatement Date: 10/22/2021
Initial Penalty: $0.00
Current Penalty: $0.00
Issuance Date: 09/27/2021
Nr Instances: 1
Nr Exposed: 3
Related Event Code (REC): C
Gravity: 10
Report ID: 0522300
Contest Date: 10/06/2021
Final Order: 03/27/2023
Emphasis:
| Type | Latest Event | Event Date | Penalty | Abatement Due Date | Citation Type | Failure to Abate Inspection |
|---|---|---|---|---|---|---|
| Penalty | F: Formal Settlement | 03/27/2023 | $0.00 | 10/22/2021 | Willful | |
| Penalty | C: Contested | 10/06/2021 | $0.00 | 10/22/2021 | Willful | |
| Penalty | Z: Issued | 09/27/2021 | $0.00 | 10/22/2021 | Willful |
Text For Citation: 02 Item/Group: 004B Hazard:
29 CFR 1910.212(a)(3)(ii):Point(s) of operation of machinery were not guarded to prevent employee(s) from having any part of their body in the danger zone(s) during operating cycle(s): a. The employer is failing to protect operators from crushing hazards on the Hall Permanent Mold Tilt Pour Devices for turntable #5, located in the foundry area. Employees are exposed to crushing hazards created by the upper and lower molds as the mold halves close. This was most recently documented on May 6, 2021 at the General Aluminum Mfg. Company facility located in Rootstown Township, Ohio.