Text For Citation: 02 Item/Group: 001A Hazard:

29 CFR 1910.147(c)(4)(i):Procedures were not developed, documented and utilized for the control of potentially hazardous energy when employees were engaged in activities covered by this section: a. The employer is failing to protect operators from pinch point hazards by ensuring employees utilized lockout procedures when performing work such as but not limited to core box prep and core box maintenance activities on the #2 core machine located in the Core Department. This was most recently documented on May 6, 2021 at the General Aluminum Mfg. Company facility located in Rootstown Township, Ohio. b. The employer is failing to protect operators from pinch point hazards by ensuring employees utilized lockout procedures when performing work such as but not limited to core box prep and core box maintenance activities on the #3143 core machine located in the Core Department. This was most recently documented on May 6, 2021 at the General Aluminum Mfg. Company facility located in Rootstown Township, Ohio. c. The employer is failing to protect operators from pinch point hazards by ensuring operators utilized lockout procedures when working on the Tilt Pour Turntable #2 located in the foundry area. Employees perform mold prep activities, maintenance on the equipment, and unjam stuck parts from the upper die at the robot catching station. This was most recently documented on May 6, 2021 at the General Aluminum Mfg. Company facility located in Rootstown Township, Ohio. d. The employer is failing to protect operators from pinch point hazards by ensuring operators utilized lockout procedures when working on the Tilt Pour Turntable #1B located in the foundry area. Employees perform mold prep activities, maintenance on the equipment, and unjam stuck parts from the upper die at the robot catching station. This was most recently documented on May 6, 2021 at the General Aluminum Mfg. Company facility located in Rootstown Township, Ohio. e. The employer is failing to protect operators from pinch point hazards by ensuring operators utilized lockout procedures when working on the Tilt Pour Turntable #4A located in the foundry area. Employees perform mold prep activities, maintenance on the equipment, and unjam stuck parts from the upper die at the robot catching station. This was most recently documented on May 6, 2021 at the General Aluminum Mfg. Company facility located in Rootstown Township, Ohio. f. The employer is failing to protect operators from pinch point hazards by ensuring operators utilized lockout procedures when working on the Tilt Pour Turntable #5 located in the foundry area. Employees perform mold prep activities, maintenance on the equipment, and unjam stuck parts from the upper die at the robot catching station. This was most recently documented on May 6, 2021 at the General Aluminum Mfg. Company facility located in Rootstown Township, Ohio. g. The employer is failing to protect operators from pinch point hazards by ensuring operators utilized lockout procedures when working on the Tilt Pour Turntable #6 located in the foundry area. Employees perform mold prep activities, maintenance on the equipment, and unjam stuck parts from the upper die at the robot catching station. This was most recently documented on May 6, 2021 at the General Aluminum Mfg. Company facility located in Rootstown Township, Ohio.