Translate
Violation Detail
Standard Cited: 19100212 A01 General requirements for all machines.
Inspection Nr: 1525407.015
Citation: 01006A
Citation Type: Serious
Abatement Date: 10/29/2021 2
Initial Penalty: $8,290.00
Current Penalty: $3,750.00
Issuance Date: 08/11/2021
Nr Instances: 6
Nr Exposed: 14
Related Event Code (REC):
Gravity: 5
Report ID: 0112000
Contest Date:
Final Order: 09/24/2021
Emphasis:
| Type | Latest Event | Event Date | Penalty | Abatement Due Date | Citation Type | Failure to Abate Inspection |
|---|---|---|---|---|---|---|
| Penalty | I: Informal Settlement | 09/24/2021 | $3,750.00 | 10/29/2021 | Serious | |
| Penalty | Z: Issued | 08/11/2021 | $8,290.00 | 09/28/2021 | Serious |
Text For Citation: 01 Item/Group: 006A Hazard:
29 CFR 1910.212(a)(1):Machine guarding was not provided to protect operator(s) and other employees from hazard(s) created by rotating parts and in-running nip points : A. Metal Cut Products: On, or about, April 27, 2021, the barrier guard provided to guard the rotating, indexing portion of the universal bar feeder on Machine 547 was not in place. B. Metal Cut Products, Tooling Area: On, or about, April 27, 2021, a chuck guard was not provided for the Romi horizontal lathe. C. Metal Cut Products: On, or about, April 27, 2021, a guard was not provided for the in-running nip point created by the grinding belt and lower pulley on the Baldor vertical belt grinder. D. Machine Shop: On, or about, May 6, 2021, the door interlock provided on Machine 61000, a Mazak Nexus 510C-II machining center, was by-passed allowing both the machining area and auger-type chip collector to run with the access doors open. E. Machine Shop: On, or about, May 6, 2021, Machine 106005, a Hurco VM1 milling center, was not provided with interlock on the access doors to the machining area. F. Machine Shop: On, or about, May 6, 2021, guard (s) were not provided to cover the in-running nip points created by the sanding belt and pulleys on the Rockwell vertical belt sander.