Text For Citation: 02 Item/Group: 001 Hazard:

29 CFR 1910.213(c)(1): Circular handfed ripsaw(s) were not guarded by an automatically adjusting hood which completely enclosed that portion of the saw above the table and above the material being cut: a) Worksite: Employees operating Martin Table Saw Type T72A, serial no. V422291, were exposed to amputation hazards in that the point of operation was not adequately guarded; on or about 5/3/19. b) Worksite: Employees operating Martin Table Saw Type T72A, serial no. V422291, were exposed to amputation hazards in that the point of operation was not adequately guarded; on or about 9/19/19. c) Worksite: Employees operating Martin Table Saw Type T72, serial no. V163729, were exposed to amputation hazards in that the point of operation was not adequately guarded; on or about 9/19/19. Note: In addition to abatement certification the employer is required to submit abatement documentation for this item in accordance with 29 CFR 1903.19. D. Reis Furniture Manufacturing Corp. was previously cited for a violation of this occupational safety and health standard or its equivalent standard 29 CFR 1910.213(c)(1), which was contained in OSHA inspection number 1224004, citation number 1, item number 2 issued on 9/14/2017 and was affirmed as a final order on 9/26/2017, with respect to a workplace located at 327 Sagamore Avenue in Mineola, NY.