Violation Detail
Standard Cited: 19100028 B07 Duty to have fall protection and falling object protection.
Inspection Nr: 1407005.015
Citation: 02006
Citation Type: Serious
Abatement Date: 12/19/2019 2
Initial Penalty: $5,834.00
Current Penalty: $3,500.40
Issuance Date: 10/31/2019
Nr Instances: 2
Nr Exposed: 2
Related Event Code (REC):
Gravity: 5
Report ID: 0112000
Contest Date: 11/27/2019
Final Order: 03/27/2020
Emphasis:
Type | Latest Event | Event Date | Penalty | Abatement Due Date | Citation Type | Failure to Abate Inspection |
---|---|---|---|---|---|---|
Penalty | F: Formal Settlement | 03/27/2020 | $3,500.40 | 12/19/2019 | Serious | |
Penalty | F: Formal Settlement | 03/27/2020 | $3,500.40 | 12/19/2019 | Serious | |
Penalty | C: Contested | 12/05/2019 | $5,834.00 | 12/19/2019 | Serious | |
Penalty | Z: Issued | 10/31/2019 | $5,834.00 | 12/19/2019 | Serious |
Text For Citation: 02 Item/Group: 006 Hazard:
29 CFR 1910.28(b)(7): 1910.28(b)(7): The employer did not ensure that each employee on a walking-working surface near an opening, including one with a chute attached, where the inside bottom edge of the opening is less than 39 inches (99 cm) above that walking-working surface and the outside bottom edge of the opening is 4 feet (1.2 m) or more above a lower level is protected from falling: Block Plant: On, or about, June 18, 2018, standard guardrails, grates or other protective means had not been provided to prevent fall hazards into chutes that were located above the mixer and block machine.